Stability trends of MAX phases from first principles
نویسندگان
چکیده
منابع مشابه
Phase stability of Crn+1GaCn MAX phases from first principles and Cr2GaC thin-film synthesis using magnetron sputtering from elemental targets
Andrejs Petruhins, Arni Sigurdur Ingason, Martin Dahlqvist, Aurelija Mockuté, Muhammad Junaid, Jens Birch, Jun Lu, Lars Hultman, Per O A Persson and Johanna Rosén, Phase stability of Crn+1GaCn MAX phases from first principles and Cr2GaC thin-film synthesis using magnetron sputtering from elemental targets, 2013, Physica Status Solidi. Rapid Research Letters, (7), 11, 971-974. http://dx.doi.org/...
متن کاملOrder and disorder in quaternary atomic laminates from first-principles calculations.
We report on the phase stability of chemically ordered and disordered quaternary MAX phases - TiMAlC, TiM2AlC2, MTi2AlC2, and Ti2M2AlC3 where M = Zr, Hf (group IV), M = V, Nb, Ta (group V), and M = Cr, Mo, W (group VI). At 0 K, layered chemically ordered structures are predicted to be stable for M from groups V and VI. By taking into account the configurational entropy, an order-disorder temper...
متن کاملA theoretical investigation of Tin+1AlCn and Mn2GaC MAX phases: phase stability and materials properties
This thesis presents theoretical research on MAX phases (M=transition metal, A=A-group element, X=carbon and/or nitrogen), with focus on predictions of phase stability as well as of physical properties. The first part is an investigation of the phase stability of the MAX phases Ti2AlC, Ti3AlC2, and Ti4AlC3 at elevated temperatures, where the former two phases have been obtained experimentally. ...
متن کاملMagnetic moment collapse induced axial alternative compressibility of Cr2TiAlC2 at 420 GPa from first principle
The electronic structure and thermodynamical properties of Cr2TiAlC2 are studied by first principles under pressure. The obtained results observed that the ferromagnetic order is the most stable ground state and the magnetic moment will collapse at about 50 GPa. As a result, the lattice a axis becomes stiffer above about 420 GPa, ultimately presenting the same axial compressibility trends with ...
متن کاملPhase stability and physical properties of nanolaminated materials from first principles
The MAX phase family is a set of nanolaminated, hexagonal materials typically comprised of three elements: a transition metal (M), an A-group element (A), and carbon and/or nitrogen (X). In this thesis, first-principles based methods have been used to investigate the phase stability and physical properties of a number of MAX and MAX-like phases. Most theoretical work on MAX phase stability use ...
متن کامل