Electromechanical reshaping of costal cartilage grafts: a new surgical treatment modality.

OBJECTIVES/HYPOTHESIS Needle electrode-based electromechanical reshaping (EMR) is a novel, ultra-low-cost nascent surgical technology to reshape cartilage with low morbidity. EMR uses direct current to induce mechanical relaxation in cartilage that is first deformed into a required geometry, which in turn leads to permanent shape change. The objective of this study was to determine the effect of EMR voltage and time on the shape change of costal cartilage grafts. STUDY DESIGN EMR of ex vivo porcine costal cartilage. METHODS Graft specimens obtained from the central core of porcine costal cartilage were bent at a 90-degree angle with a custom jig and then reshaped via EMR. The effects of voltage (3-7 V) and application time (1-5 minutes) on the amount of shape change were systematically examined. Bend angles were analyzed using analysis of variance and paired t tests to determine significant reshaping times at each voltage setting. RESULTS There is a threshold for voltage and time above which the retention of bend angle is statistically significant in treated specimens compared to the control (P < .05). Above the threshold of 3 V, shape retention initially increased with application time for all voltages tested and was then observed to reach a plateau. Shape retention was noted to be greatest at 6 V without a rise in temperature. CONCLUSIONS EMR provides a novel method to bend and shape costal cartilage grafts for use in facial plastic surgery. A low voltage can reshape cartilage grafts within several minutes and without the heat generation. This study demonstrates the feasibility of EMR and brings this minimally invasive procedure closer to clinical implementation.