A micromechanism study of thermosonic gold wire bonding on aluminum pad
نویسندگان
چکیده
on aluminum pad H. Xu, C. Liu, V. V. Silberschmidt, S. S. Pramana, T. J. White, Z. Chen, M. Sivakumar, and V. L. Acoff Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, Loughborough, LE11 3TU, United Kingdom Department of Metallurgical and Materials Engineering, The University of Alabama, Tuscaloosa, Alabama 35487, USA School of Materials Science and Engineering, Nanyang Technological University, Nanyang Avenue, Singapore 639798 Centre for Advanced Microscopy, Australian National University, Canberra ACT 2601, Australia ASM Technology Singapore, 2 Yishun Avenue 7, Singapore 768924
منابع مشابه
Effect of Temperature on Deformation Characteristics of Gold Ball Bond in Au-Al Thermosonic Wire Bonding
Wire bonding is a process that is used to form solid-state bonds to interconnect metals such as gold wires to metalized pads deposited on silicon integrated circuits. Typically, there are 3 main wire bonding techniques; Thermo-compression, Ultrasonic and Thermosonic. This experiment utilizes thermosonic bonding which applies heat, ultrasonic energy and force on an Au-Al system. Sixteen groups o...
متن کاملBonding to the Chip Face
‘Wire bonding’ is used throughout the microelectronics industry for interconnecting dice, substrates and output pins. Fine wires, generally of aluminium or gold 18–50μm in diameter, are attached using pressure and ultrasonic energy to form metallurgical bonds. Devices bonded with gold wire generally need additional thermal energy, and the bonding process is referred to as ‘thermosonic’ rather t...
متن کاملEvaluation of wire bonding performance, process conditions, and metallurgical integrity of chip on board wire bonds
Chip on board wire bonding presents challenges to modern wire bonding technology which include smaller, closely spaced wire bond pads; bonding to soft substrates without special processing and pad construction; and diverse first bond and second bond metallurgies. These challenges are addressed by extensive bonding accuracy tests, a design of experiments approach for optimizing wire bond process...
متن کاملEFFECTS OF THERMAL AGING ON INTERMETALLIC COMPOUNDS AND VOIDS FORMATION IN AuAl WIRE BONDING
There are several issues related to the mechanical and electrical wirebond failure during wirebonding process. Major factors are associated with AuAl intermetallic system. AuAl intermetallic compounds (IMC) can easily form at room temperature and can be accelerated with the elevated temperature. In this paper, pattern of intermetallic compounds growth and potential degradation due to voids in t...
متن کاملNext Generation Nickel-Based Bond Pads Enable Copper Wire Bonding
Copper wire bonding has huge cost advantages over gold wire bonding. As a result, low pin count, heavy wire applications have already been converted to copper wire and many companies are in high volume production. Recently, with the price of gold skyrocketing, conversion of high pin count (>250 I/O), high performance applications to Cu has dramatically accelerated. These high performance device...
متن کامل