A Study of Producing Ceramic Glaze Utilizing Shihmen Reservoir Silt

نویسندگان

  • Chi-Chang Lu
  • Po-Hsien Lin
چکیده

This study is based on the Shihmen Reservoir silt, where the largest quantity of silt is deposited and is located right next to the National Taiwan University of Art, and with combinations of other simple components, like various kinds of clay, plant ashes or other raw materials, to produce quality glazes that can perform artistic charm and give great additional values. The development of the new glaze formula is processed by the “Triangular Coordinate Method” to organize and distribute proportions of the raw materials and through the practical reconcile and firing experiments to acquire the suitable formulas. This study has successfully produced glazes such as the Oil-spot Glaze, Red Iron Glaze, Red Iron Crystalline Glaze, Golden Black Glaze, Golden Purple Glaze, Amber Glaze, Yellow Glaze, Beige Glaze and Celadon Glaze. In some of these glazes, the employment proportion of the silt can reach up to the range of 80% to 90%. In general, to employ the Shihmen Reservoir as a type of raw material can not only be practical, but possess many distinctive qualities.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Lead ingestion associated with ceramic glaze--Alaska, 1992.

In August 1992, a physician notified the Alaska Division of Public Health (ADPH) that three patients at a psychiatric hospital had consumed ceramic glaze during ceramic therapy (i.e., recreation therapy involving the production of ceramic ware), and two of these patients had elevated blood lead levels (BLLs). This report summarizes the ADPH's investigation of these ingestions.

متن کامل

Comparison between Biaxial Flexural Strength and Microstructure of Polished and Glaze-Fired Specimens of Zirconia Lithium Silicate Glass Ceramic

Introduction: There has been a growing interest in glass ceramic systems with good esthetics, high fracture resistance, bonding durability, and simplified fabrication techniques using CAD/CAM. The aim of this study was to compare flexural strength in "polished" and "glazed and fired" specimens of zirconium lithium silicate (ZLS) CAD/CAM blocks Celtra Duo. Methods</stron...

متن کامل

Improving adhesion between luting cement and zirconia-based ceramic with an alternative surface treatment.

This study evaluated the influence of an alternative surface treatment on the microshear bond strength (μsbs) of zirconia-based ceramic. Thirty-five zirconia disks were assigned to five groups according to the following treatments: Control (CO), glass and silane were not applied to the zirconia surface; G1, air blasted with 100μm glass beads + glaze + silane; G2, a gel containing 15% (by weight...

متن کامل

Effect of iron oxide content on the crystallisation of a diopside glass–ceramic glaze

The effect of iron oxide content on the crystallisation of a diopside glass–ceramic glaze was investigated using a glass–ceramic frit in the K2O–ZnO–MgO–CaO–Al2O3–SiO2 system and a granite waste glass. Measurements by X-ray diffraction (XRD) combined with scanning electron microscopy (SEM) and EDX microanalysis showed that the distribution of Fe ions among different crystalline phases such as f...

متن کامل

The Effect of Polishing and Glazing Procedure on Streptococcus Mutans Adhesion of Three CAD/CAM Ceramics (in vitro)

Abstract Background and Aim: Polish and glaze are 2 methods to decrease roughness and bacterial adhesion to the ceramic surfaces. This in vitro study assessed the effect of polish and glaze on the bacterial adhesion of 3 ceramics. Materials and Methods: In this in vitro trial, samples of zirconia-reinforced lithium silicate, lithium disilicate and monolithic zirconia ceramic specimens were mill...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011