Simulation Research of Extension Control Based on Crane-Double Pendulum System
نویسندگان
چکیده
According to the existed structure and algorithm of extension controller, proposed an improved extension control algorithm based on the Optimal Control, which was named LQR-EC, and applied to a SIMO system—Crane-Double Pendulum System. And, using MATLAB simulation platform to study the effect of the LQR—EC Algorithm. The result shows that, the LQR-EC Algorithm not only has a simple theory, but also has rapid response and stability.
منابع مشابه
Dynamics and Regulation of Locomotion of a Human Swing Leg as a Double-Pendulum Considering Self-Impact Joint Constraint
Background:Despite some successful dynamic simulation of self-impact double pendulum (SIDP)-as humanoid robots legs or arms- studies, there is limited information available about the control of one leg locomotion.Objective :The main goal of this research is to improve the reliability of the mammalians leg locomotion and building more elaborated models close to the natural movements, by modelin...
متن کاملSingle Input Fuzzy Controller with Command Shaping Schemes for Double-pendulum-type Overhead Crane
This paper presents investigations into the development of composite control schemes for trajectory tracking and antisway control of a double-pendulum-type overhead crane (DPTOC) system. A nonlinear DPTOC system is considered and the dynamic model of the system is derived using the Euler-Lagrange formulation. The proposed method, known as the Single Input Fuzzy Logic Controller (SIFLC), reduces...
متن کاملMA3-6 : Reduction of Double-Pendulum Bridge Crane Oscillations
The natural sway of crane payloads is detrimental to safe and efficient operation. Under certain conditions, the problem is complicated when the payloads create a double-pendulum effect. Most crane control research to date has focused on single-mode dynamics. For example, several researchers have shown that signal-mode oscillations can be greatly reduced by properly shaping the inputs to the cr...
متن کاملCombined Input Shaping and Feedback Control of a Double - Pendulum System Subject to External Disturbances
A control system combining input shaping and feedback is applied to a double-pendulum bridge crane subjected to external disturbances. The external disturbances represent naturally occurring forces, such as gusting winds. The proposed control method achieves fast point-to-point response similar to open-loop input-shaping control. It also minimizes transient deflections and disturbance-induced r...
متن کاملPractical Sway Motion Control for Double Pendulum-type Overhead Crane System
The sway motion of crane can be successfully suppressed by properly shaping the reference command. Input shaping is a one type of feed-forward shaping method that is based on linear superposition. In this paper, we present the impact of double pendulum type overhead crane (DPTOC) system on the effectiveness of input shaping. An unshaped bang-bang input force is used to determine the characteris...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Computer and Information Science
دوره 2 شماره
صفحات -
تاریخ انتشار 2009