The Effect of Microporous Polymeric Support Modification on Surface and Gas Transport Properties of Supported Ionic Liquid Membranes.

نویسندگان

  • Alsu A Akhmetshina
  • Ilsiya M Davletbaeva
  • Ekaterina S Grebenschikova
  • Tatyana S Sazanova
  • Anton N Petukhov
  • Artem A Atlaskin
  • Evgeny N Razov
  • Ilnaz I Zaripov
  • Carla F Martins
  • Luísa A Neves
  • Ilya V Vorotyntsev
چکیده

Microporous polymers based on anionic macroinitiator and toluene 2,4-diisocyanate were used as a support for 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([emim][Tf₂N]) immobilization. The polymeric support was modified by using silica particles associated in oligomeric media, and the influence of the modifier used on the polymeric structure was studied. The supported ionic liquid membranes (SILMs) were tested for He, N₂, NH₃, H₂S, and CO₂ gas separation and ideal selectivities were calculated. The high values of ideal selectivity for ammonia-based systems with permanent gases were observed on polymer matrixes immobilized with [bmim][PF₆] and [emim][Tf₂N]. The modification of SILMs by nanosize silica particles leads to an increase of NH₃ separation relatively to CO₂ or H₂S.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Correlating Physicochemical Properties of Commercial Membranes with CO2 Absorption Performance in Gas-Liquid Membrane Contactor

The gas-liquid membrane contactor (GLMC) is a promising alternative gas absorption/desorption configuration for effective carbon dioxide (CO2 ) capture. The physicochemical properties of membranes may synergistically affect GLMC performances, especially during the long-term operations. In this work, commercial polypropylene (PP) and polyvinylidene fluoride (PVDF) hollow fiber (HF) membranes wer...

متن کامل

Gas transport and separation with ceramic membranes. Part II. Synthesis and separation properties of microporous membranes

Non-supported microporous silica (amorphous) and titania thin films were made by the polymeric gel route. The titania system consisted of particles smaller than 5 nm. Reproducible modification of supported y-alumina films with silica demands a strict control of every modification step. Silica films of 3060 nm thickness on top of and presumably partly inside the y-alumina film were realised. The...

متن کامل

مدل سازی ریاضی انتقال جرم گازها در غشا‌ءهای نامتقارن متخلخل پلیمری

It is several decades that the application of membrane processes for gas separation has become a great concern within industries. Among them, the polymeric membranes of different structures have played the most important role. Such application has been widely extended to gas separation and due to the necessity of both; prediction of the behavior of these processes and recognition of the effecti...

متن کامل

Regeneration of СO2 Physical Solvents at Elevated Pressures in Gas-Liquid Membrane Contactor

In the present work, a membrane contactor with asymmetric flat-sheet poly(vinyltrimethylsilane) (PVTMS) membranes was proposed for the CO2 desorption process from physical solvents at elevated trans-membrane pressures. Different solvents were studied: water, a mixture of polyethylene g...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Membranes

دوره 6 1  شماره 

صفحات  -

تاریخ انتشار 2015