3D printing of interdigitated Li-ion microbattery architectures.
نویسندگان
چکیده
3D interdigitated microbattery architectures (3D-IMA) are fabricated by printing concentrated lithium oxide-based inks. The microbatteries are composed of interdigitated, high-aspect ratio cathode and anode structures. Our 3D-IMA, which exhibit high areal energy and power densities, may find potential application in autonomously powered microdevices.
منابع مشابه
Nanoarchitectured 3D cathodes for Li-ion microbatteries.
Rechargeable lithium ion batteries, due to their high energy density and design fl exibility, are the vital power sources for a variety of modern portable electronic devices and are the prime candidates to power next generation of electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs). [ 1 ] With a rich and versatile chemistry leading to a wide range of electrode materials, severa...
متن کاملStamped microbattery electrodes based on self-assembled M13 viruses.
The fabrication and spatial positioning of electrodes are becoming central issues in battery technology because of emerging needs for small scale power sources, including those embedded in flexible substrates and textiles. More generally, novel electrode positioning methods could enable the use of nanostructured electrodes and multidimensional architectures in new battery designs having improve...
متن کاملIntegration of high capacity materials into interdigitated mesostructured electrodes for high energy and high power density primary microbatteries
Microbatteries are increasingly important for powering electronic systems, however, the volumetric energy density of microbatteries lags behind that of conventional format batteries. This paper reports a primary microbattery with energy density 45.5 mWh cm 2 mm 1 and peak power 5300 mW cm 2 mm 1, enabled by the integration of large volume fractions of high capacity anode and cathode chemistry i...
متن کاملPreparation of Ni current collector and MoS2 cathode in three-dimensional Li ion microbattery based on silicon MCP
Three-dimensional Li ion microbatteries are known for their high surface area which leads to high current and capacity compared to traditional planar batteries. This paper describes economical approaches to prepare half 3D microbatteries based on silicon microchannel plates (MCP). The high aspect ratio silicon MCP is formed by electrochemical etching and a nickel layer is coated onto the silico...
متن کاملThe Emerging Frontiers and Applications of High-Resolution 3D Printing
Over the past few decades, there has been an increasing interest in the fabrication of complex high-resolution three-dimensional (3D) architectures at micro/nanoscale. These architectures can be obtained through conventional microfabrication methods including photolithography, electron-beam lithography, femtosecond laser lithography, nanoimprint lithography, etc. However, the applications of th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Advanced materials
دوره 25 33 شماره
صفحات -
تاریخ انتشار 2013