Effect of Constitutional Supercooling on the Numerical Solution of Species Concentration Distribution in Laser Surface Alloying
نویسندگان
چکیده
2157-67. 3. M. Maeda and Y. Kariya: Iron Steel Inst. Jpn. Int., 1993, vol. 33, pp. 182-87. 4. N. Nakashima, K. Hayashi, Y. Ohta, and K. Morinaga: Mater. Trans. JIM, 1991, vol. 32, pp. 37-42. 5. S. Ueda and M. Maeda: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 921-25. 6. S. Ueda, K. Takemoto, T. Ikeda, and M. Maeda: Iron Steel Inst. Jpn. Int., 2000, vol. 40, pp. s92-s95. 7. A. Tagaya, F. Tsukihashi, and N. Sano: Trans. ISS, 1991, pp. 63-69. 8. J. Mukerji: J. Am. Ceram. Soc., 1965, vol. 48 (4), pp. 210-13. 9. A.K. Chatterjee and G.I. Zhmoidin: J. Mater. Sci., 1972, vol. 7, pp. 93-97.
منابع مشابه
Modeling and Optimization of Nano-bubble Generation Process Using Response Surface Methodology
In this paper, size distribution of nano-bubbles was measured by the reliable and fast method of laser diffraction technique. Nano-bubbles were produced using a nano-bubble generator designed and made based on hydrodynamic cavitation phenomenon in Venturi tubes. A Central Composite Design with Response Surface Methodology was used to conduct a five factor, five level factorial experimental desi...
متن کاملNumerical Simulation Of Heat Affected Zone Microstructure During Laser Surface Melting
Microstructural changes during laser welding and laser surface treatment has been regarded by many researchers. Most researches have focused on studying the effect of various process parameters on the size and microstructure of the heat affected zone. But some studies show that the initial microstructure of the base metal can also affect the heat affected zone dimensions and final microstructur...
متن کاملEXPERIMENTAL AND NUMERICAL INVESTIGATION ON LASER BENDING PROCESS
Laser bending is an advanced process in sheet metal forming in which a laser heat source is used to shape the metal sheet. In this paper, temperature distribution in a mild steel sheet metal is investigated numerically and experimentally. Laser heat source is applied through curved paths in square sheet metal parts. Finite element (FE) simulation is performed with the ABAQUS/CAE standard softwa...
متن کاملExperimental and numerical study of heat flux distribution in laser forming of bi-layer sheets
Laser forming is a modern process which is mainly used for forming metals. Different Lasers are used in this regard that includes Nd: YAG and CO2. In this study, forming bi-layer sheets of Aluminum/Ceramic by Laser was investigated. Furthermore, effect of Uniform and Gaussian heat flux distribution in different power, velocity, and beam diameters on bending angle was studied. FEM simulation ind...
متن کاملNumerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418
In this paper, a three-dimensional finite element model has been developed to simulate the laser-TIG hybrid welding (HLAW) of stainless steel 1.4418 with thickness of 4 mm. Transient temperature profile and dimensions of the fusion zone and heat affected zone (HAZ) during welding process are calculatedusing finite element method (FEM) and were solved in the ABAQUS/Standard software.The heat sou...
متن کامل