Fabrication of Microstructures by Powder Blasting
نویسنده
چکیده
Harry Mulisch, De ontdekking van de hemel.
منابع مشابه
Fabrication of microfluidic mixers with varying topography in glass using the powder-blasting process
The powder-blasting method is used to fabricate structures with a three-dimensional topography in glass using elastomeric masks. The relation between the mask opening width and the erosion depth is exploited to fabricate microstructures with varying depth in a single micropatterning step. As an application, planar three-dimensional micro-mixers were fabricated, which consist of a repeating conv...
متن کاملAn Experimental Study on the Fabrication of Glass-based Acceleration Sensor Body Using Micro Powder Blasting Method
This study investigated the feasibility of the micro powder blasting technique for the micro fabrication of sensor structures using the Pyrex glass to replace the existing silicon-based acceleration sensor fabrication processes. As the preliminary experiments, the effects of the blasting pressure, the mass flow rate of abrasive and the number of nozzle scanning times on erosion depth of the Pyr...
متن کاملFabrication of Biochips with Micro Fluidic Channels by Micro End-milling and Powder Blasting
For microfabrications of biochips with micro fluidic channels, a large number of microfabrication techniques based on silicon or glass-based Micro-Electro-Mechanical System (MEMS) technologies were proposed in the last decade. In recent years, for low cost and mass production, polymer-based microfabrication techniques by microinjection molding and micro hot embossing have been proposed. These t...
متن کاملMicrofabrication of Microchannels for Fuel Cell Plates
Portable electronic devices such as notebook computers, PDAs, cellular phones, etc., are being widely used, and they increasingly need cheap, efficient, and lightweight power sources. Fuel cells have been proposed as possible power sources to address issues that involve energy production and the environment. In particular, a small type of fuel-cell system is known to be suitable for portable el...
متن کاملارائه روشی جدید برای طراحی الگوی چال های انفجار در معادن روباز
A comprehensive investigation was carried out to minimize the cost price of the rock fragmentation process including: drilling, blasting, secondary blasting and separating the large boulders (oversize rocks) while loading, until the optimized fragmentation, powder factor and ratio of burden (B) to blasthole diameter (?h) were achieved by doing several stages of drilling and blasting practically...
متن کامل