Throughput Optimization in Multi-hop Wireless Networks with Random Access

This research investigates cross-layer design in multi-hop wireless networks with random access. Due to the complexity of the problem, we study cross-layer design with a simple slotted ALOHA medium access control (MAC) protocol without considering any network dynamics. Firstly, we study the optimal joint configuration of routing and MAC parameters in slotted ALOHA based wireless networks under a signal to interference plus noise ratio based physical interference model. We formulate a joint routing and MAC (JRM) optimization problem under a saturation assumption to determine the optimal max-min throughput of the flows and the optimal configuration of routing and MAC parameters. The JRM optimization problem is a complex non-convex problem. We solve it by an iterated optimal search (IOS) technique and validate our model via simulation. Via numerical and simulation results, we show that JRM design provides a significant throughput gain over a default configuration in a slotted ALOHA based wireless network. Next, we study the optimal joint configuration of routing, MAC, and network coding in wireless mesh networks using an XOR-like network coding without opportunistic listening. We reformulate the JRM optimization problem to include the simple network coding and obtain a more complex non-convex problem. Similar to the JRM problem, we solve it by the IOS technique and validate our model via simulation. Numerical and simulation results for different networks illustrate that (i) the iii jointly optimized configuration provides a remarkable throughput gain with respect to a default configuration in a slotted ALOHA system with network coding and (ii) the throughput gain obtained by the simple network coding is significant, especially at low transmission power, i.e., the gain obtained by jointly optimizing routing, MAC, and network coding is significant even when compared to an optimized network without network coding. We then show that, in a mesh network, a significant fraction of the throughput gain for network coding can be obtained by limiting network coding to nodes directly adjacent to the gateway. Next, we propose simple heuristics to configure slotted ALOHA based wireless networks without and with network coding. These heuristics are extensively evaluated via simulation and found to be very efficient. We also formulate problems to jointly configure not only the routing and MAC parameters but also the transmission rate parameters in multi-rate slotted ALOHA systems without and with network coding. We compare the performance of multi-rate and single rate systems via numerical results. We model the energy consumption in terms of slotted ALOHA system parameters. We found out that the energy consumption for various cross-layer systems, i.e., single rate and multi-rate slotted ALOHA systems without and with network coding, are very close.