Investigating the Effect of False Twist Texturing Process on the Color Coordinates Variation of Spun-dyed Polyester Filament Yarns
نویسندگان
چکیده
Correspondence to: Mohammad Amani Tehran email: [email protected] ABSTRACT In this study, color coordinates variation of spundyed polyester filament yarns subjected to the false twist texturing process was investigated. Furthermore, the effect of different processing parameters including D/Y ratio, twist, heater temperature, texturing speed, overfeed, the draw ratio and intermingling process on the color coordinates variation of textured yarns was studied. Finally, the magnitude of color variation was analyzed by studying the structure, crimp and tensile properties of the yarns. The results show that the nature of texturing and intermingling process had a significant effect on the color variation of yarns but different processing parameters had no significant effect. The level of these variations can be expressed by observing the fiber geometry change along the texturing process.
منابع مشابه
Effect of Abrasion Process on Reflectance Factor and Color Change of Chenille Woven Fabrics
This paper focuses on effect of abrasion process on color and reflectance factor changes of dyed woven fabrics containing 100% acrylic chenille yarns in weft and cotton warp yarns. Three fabrics having 12, 14 and 16 weft per centimeter were dyed with three basic dyes in different hues. Four different abrasion levels, i.e. 50,200,400 and 650 were selected to abrade samples. The obtained results ...
متن کاملStudy on the Damaging of Dyed Cotton Fibers with Direct Dye in Spinning Processes and its Effect on the Properties of Cotton Mélange Yarn
The influence of dyeing and spinning on the characteristics of cotton fibers and its impact on the properties of cotton mélange yarn has been investigated. Grey cotton fibers with mean fiber length and fineness of 29 mm and 4.2 micronair were pre-treated and dyed. Three ring yarns were spun from 100 % grey cotton (R.R.Y), 50-50 % blend of dyed and grey cotton (M.R.Y) and 100 % dyed cotton fiber...
متن کاملBending and Compression Behaviour of Polyester Air-jet-textured and Cotton-yarn Fabrics
Air-jet-textured polyester yarns were produced using two feed yarns differing in filament fineness and number of filaments. By varying the yarn overfeed, filament fineness and air pressure, four textured yarns were produced. Woven fabrics were prepared using these textured yarns as weft and cotton yarns in warp. To study the effect of air-jet-texturing parameters on the bending and compression ...
متن کاملThe Development of a Passive False Twister Mechanism in Handling Low Strength Cotton Slivers on High Draft Spinning Machine
A passive false twist unit (spiral) has been developed to assist with the handling lowstrength slivers on a high speed-spinning machine with a high-speed feed. In the first trial, a falsetwist simulator device was constructed to determine whether the passive false twist unit can be usedon high speed feeding with different can distance from the feeding device. In the second trial, theeffects of ...
متن کاملEffects of Changes in Front Drafting Rollers Geometry on the Properties of Ring Spun Yarns
Regarding the importance of ring spinning method among spinning systems, great potentials exist for research about on the improvement of the quality and properties of ring spun yarn. This study aims to improve yarn quality by changing the shape and dimensions of spinning triangle through forming a groove in the middle zone of the front darfting roller with a curvature of 5 to 7 mm. For the to...
متن کامل