Organic - Inorganic Hybrid Solar Cell Efficiency Improvement by Employing Au Nanocluster

نویسندگان

  • Arturo Ayon
  • Manisha Sharma
چکیده

Au nanocluster and PEDOT: PSS blend in the electricalPerformance of Hybrid silicon solar cell. Report Title Poly( 3,4-ethyllenedioxythiophene):poly (styrene sulfonate) (PEDOT:PSS), a P-type organic polymer is frequently employed in the fabrication of heterojuction p-n solar cell devices due to its proper HOMO-LUMO band gap as well as its tunable conductivity. Addition of small volume percentage of organic additives such as dimethyl sulfoxide (DMSO) has a positive effect on the conductivity of this polymer. In this report we describe the incorporation of gold (Au) nanocluster in the PEDOT: PSS and the effect of this blend on the power-conversion efficiency (PCE) on planer silicon (Si) hybrid heterojunction solar cell devices. Specifically, the reference sample without the aforementioned nanocluster were measured to exhibit a 6.10 % PCE value that increase to 7.55% upon the addition of the Au nanocluster. The observed increase in the PCE is attributed to the enhanced electrical conductivity of the PEDOT: PSS film due to the incorporation of the nanocluster, which is directly reflected in their improved fill factor. It is further theorized that presence of Au nanocluster in the insulating PSS layer in the PEDOT: PSS blend have a positive influence in the charge collection effectiveness of the devices produced. Considering that the Au nanoparticles involved in this research exercise had an average size of only 4nm, it is consider that plasmonic effect did not play a relevant role in the observed PCE improvement . Conference Name: 2015 IEEE 42nd Photovoltaic Specialists Conference Conference Date: June 14, 2015 Organic-Inorganic Hybrid Solar Cell Efficiency Improvement by Employing Au Nanocluster Manisha Sharma and Arturo A Ayon The MEMS Research Laboratory, The University of Texas at San Antonio, One UTSA Circle, San Antonio, Texas, 78249, USA Abstract — Poly( 3,4-ethyllenedioxythiophene):poly (styrene sulfonate) (PEDOT:PSS), a P-type organic polymer is frequently employed in the fabrication of heterojuction p-n solar cell devices due to its proper HOMO-LUMO band gap as well as its tunable conductivity. Addition of small volume percentage of organic additives such as dimethyl sulfoxide (DMSO) has a positive effect on the conductivity of this polymer. In this report we describe the incorporation of gold (Au) nanocluster in the PEDOT: PSS and the effect of this blend on the power-conversion efficiency (PCE) on planer silicon (Si) hybrid heterojunction solar cell devices. Specifically, the reference sample without the aforementioned nanocluster were measured to exhibit a 6.10 % PCE value that increase to 7.55% upon the addition of the Au nanocluster. The observed increase in the PCE is attributed to the enhanced electrical conductivity of the PEDOT: PSS film due to the incorporation of the nanocluster, which is directly reflected in their improved fill factor. It is further theorized that presence of Au nanocluster in the insulating PSS layer in the PEDOT: PSS blend have a positive influence in the charge collection effectiveness of the devices produced. Considering that the Au nanoparticles involved in this research exercise had an average size of only 4nm, it is consider that plasmonic effect did not play a relevant role in the observed PCE improvement . , Poly( 3,4-ethyllenedioxythiophene):poly (styrene sulfonate) (PEDOT:PSS), a P-type organic polymer is frequently employed in the fabrication of heterojuction p-n solar cell devices due to its proper HOMO-LUMO band gap as well as its tunable conductivity. Addition of small volume percentage of organic additives such as dimethyl sulfoxide (DMSO) has a positive effect on the conductivity of this polymer. In this report we describe the incorporation of gold (Au) nanocluster in the PEDOT: PSS and the effect of this blend on the power-conversion efficiency (PCE) on planer silicon (Si) hybrid heterojunction solar cell devices. Specifically, the reference sample without the aforementioned nanocluster were measured to exhibit a 6.10 % PCE value that increase to 7.55% upon the addition of the Au nanocluster. The observed increase in the PCE is attributed to the enhanced electrical conductivity of the PEDOT: PSS film due to the incorporation of the nanocluster, which is directly reflected in their improved fill factor. It is further theorized that presence of Au nanocluster in the insulating PSS layer in the PEDOT: PSS blend have a positive influence in the charge collection effectiveness of the devices produced. Considering that the Au nanoparticles involved in this research exercise had an average size of only 4nm, it is consider that plasmonic effect did not play a relevant role in the observed PCE improvement . , Index Terms — hybrid solar cell, tunable conductivity, organic polymer, heterojunction, nanocluster

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of TiO2 Nanofiber Density on Organic-Inorganic Based Hybrid Solar Cells (RESEARCH NOTE)

Abstract In this work, a comparative study of hybrid solar cells based on P3HT and TiO2 nanofibers was accomplished. Electrospinning, a low cost production method for large area nanofibrous films, was employed to fabricate the organic-inorganic hybrid solar cells based on poly (3-hexylthiophene) and TiO2 nanofibers. The performance of the hybrid solar cells was analyzed for four density levels ...

متن کامل

Investigation of the Effect of Band Offset and Mobility of Organic/Inorganic HTM Layers on the Performance of Perovskite Solar Cells

Abstract: Perovskite solar cells have become an attractive subject in the solar energydevice area. During ten years of development, the energy conversion efficiency has beenimproved from 2.2% to more than 22%, and it still has a very good potential for furtherenhancement. In this paper, a numerical model of the perovskite solar cell with thestructure of glass/ FTO/ TiO2/...

متن کامل

بهبود چگالی جریان و افزایش کارایی سلول خورشیدی پلیمری P3HT:PCBM با استفاده از نانومیله اکسید روی

Hybrid solar cells combine organic and inorganic materials with the aim of utilizing the low cost cell production of organic photovoltaics (OPV) as well as obtaining other advantages, such as tuneable absorption spectra, from the inorganic component. Whilst hybrid solar cells have the potential to achieve high power conversion efficiencies (PCE), currently obtained efficiencies are quite low. T...

متن کامل

Ti/Au Cathode for Electronic transport material-free organic-inorganic hybrid perovskite solar cells

We have fabricated organic-inorganic hybrid perovskite solar cell that uses a Ti/Au multilayer as cathode and does not use electron transport materials, and achieved the highest power conversion efficiency close to 13% with high reproducibility and hysteresis-free photocurrent curves. Our cell has a Schottky planar heterojunction structure (ITO/PEDOT:PSS/perovskite/Ti/Au), in which the Ti inser...

متن کامل

13.2% efficiency Si nanowire/PEDOT:PSS hybrid solar cell using a transfer-imprinted Au mesh electrode

UNLABELLED In recent years, inorganic/organic hybrid solar cell concept has received growing attention for alternative energy solution because of the potential for facile and low-cost fabrication and high efficiency. Here, we report highly efficient hybrid solar cells based on silicon nanowires (SiNWs) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) ( PEDOT PSS) using transfer-imp...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015