Seismic Response of a Platform-Frame System with Steel Columns
نویسندگان
چکیده
Timber platform-frame shear walls are characterized by high ductility and diffuse energy dissipation but limited in-plane shear resistance. A novel lightweight constructive system composed of steel columns braced with oriented strand board (OSB) panels was conceived and tested. Preliminary laboratory tests were performed to study the OSB-to-column connections with self-drilling screws. Then, the seismic response of a shear wall was determined performing a quasi-static cyclic-loading test of a full-scale specimen. Results presented in this work in terms of force-displacement capacity show that this system confers to shear walls high in-plane strength and stiffness with good ductility and dissipative capacity. Therefore, the incorporation of steel columns within OSB bracing panels results in a strong and stiff platform-frame system with high potential for lowand medium-rise buildings in seismic-prone areas.
منابع مشابه
NEW RCS Frame Connection in Structures
Hybrid moment frame come together with reinforced concrete columns with structural steel beams (RCS). This Composite system provides several key advantages over current steel or concrete moment resisting frame. Past studies have shown this system to be efficient in both design and building stage while able to keep sufficient strength and necessary ductility in seismic zone.Although past researc...
متن کاملThe Effect of Analysis Methods on the Response of Steel Dual-System Frame Buildings for Seismic Retrofitting
In the present paper, the focus is on the evaluation of steel dual-system frame buildings using four main types of structural analysis (Linear Static, Linear Dynamic, Nonlinear Static and Nonlinear Dynamic Analyses) with regard to "Seismic Rehabilitation Code for Existing Buildings in Iran" (based on FEMA 273 and 356) where the first two authors of the article tend to follow the previous work (...
متن کاملInvestigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method
The composite structural system (RCS) is a new type of moment frame, which is including a combination of concrete columns (RC) and steel beams (S). These structural systems have the advantages of both concrete and steel frames [1]. In previous research on composite structures, there are some studies regarding RCS composite conections, but there is no investigation about seismic resisting system...
متن کاملSeismic Evaluation of Flexible-Base Low-Rise Steel Frames Using Beam-On-Nonlinear-Winkler-Foundation Modeling of Shallow Footings
Recent investigations have shown that the influences of Soil-Structure Interaction (SSI) may be detrimental to the seismic response of structure, and hence neglecting this phenomenon in analysis and design may lead to an un-conservative design. The objective of this paper is to quantify the effects of nonlinear soil-structure interaction on the seismic response of a low-rise special moment fram...
متن کاملEffect of column-foundation connection stiffness on seismic performance of rocking steel braced frame
Residual drifts after severe earthquakes interrupt serviceability of buildings. Retrofitting of such buildings is in many cases very difficult and consumes lots of time and money. Recently, there are some attempts to develop the seismic design procedures to not only satisfy life safety criteria but also lead to more economical buildings. One of these modern methods of improving seismic performa...
متن کامل