On the computation of stress fields on polygonal domains with V-notches
نویسندگان
چکیده
The interior stress problem is solved numerically for a single edge notched specimen under uniaxial load. The algorithm is based on a modification of a Fredholm second kind integral equation with compact operators due to Muskhelishvili. Several singular basis functions for each of the seven corners in the geometry enable high uniform resolution of the stress field with a modest number of discretization points. As a consequence, notch stress intensity factors can be computed directly from the solution. This is an improvement over other procedures where the stress field is not resolved in the corners and where notch stress intensity factors are computed in a roundabout way via a pathindependent integral. Numerical examples illustrate the superior stability and economy of the new scheme.
منابع مشابه
Stress Field Analysis of V-Notches with Tip Cracks in a Polymer Material Using Digital Image Correlation
In this study, displacement field around v-notches of a poly methyl metha crylate (PMMA) specimen with tip cracks will be analyzed using digital image correlation technique. First intensity factor in combination with in-plane rigid body translations and rotation components will be determined by linear least squares fitting of the displacement field data to the corresponding relations among stre...
متن کاملClamped-Free Non Homogeneous Magneto Electro Elastic Plate of Polygonal Cross-Sections with Hydrostatic Stress and Gravity
In this article, the influence of hydrostatic stress and gravity on a clamped- free non homogeneous magneto electro elastic plate of polygonal cross sections is studied using linear theory of elasticity. The equations of motion based on two-dimensional theory of elasticity are applied under the plane strain assumption of prestressed and gravitated magneto electro elastic plate of polygonal cros...
متن کاملEstimation of Fracture path in the Structures and the Influences of Non-singular term on crack propagation
In the present research, a fully Automatic crack propagation as one of the most complicated issues in fracture mechanics is studied whether there is an inclusion or no inclusion in the structures. In this study The Extended Finite Element Method (XFEM) is utilized because of several drawbacks in standard finite element method in crack propagation modeling. Estimated Crack paths are obtained by ...
متن کاملStudy of Variation of the J-integral and the Fracture Toughness in Blunt V-notches under Mode I Loading
Fracture assessment of U- and V-notches is important in mechanical engineering. One can use the J-integral as fracture parameter in order to predict the critical fracture load in notches. The critical value of the J-integral in cracks is a function of the material properties. In notches, however, the material properties as well as the notch dimensions affect this critical value (named fracture ...
متن کاملDetermination of the Effective Parameters for Perforated Functionally Graded Plates with Polygonal Cutout by Analytical Solution
This paper investigates the moments and stress resultants from infinite FG laminates with different polygonal cutouts subject to uniaxial tensile load. The analytical solution used for the calculation of stress resultants and moments is the basis of the complex-variable method and conformal mapping function. The impact of various factors, namely cutout orientation angle, cutout aspect ratio as ...
متن کامل