Optimum policy for a production system with major repair and preventive maintenance
نویسنده
چکیده
This study applies periodic preventive maintenance (PM) to a repairable production system with major repairs conducted after a failure. This study considers failed PM due to maintenance workers incorrectly performing PM and damages occurring after PM. Therefore, three PM types are considered: imperfect PM, perfect PM and failed PM. Imperfect PM has the same failure rate as that before PM, whereas perfect PM makes restores the system perfectly. Failed PM results in system deterioration and major repairs are required. The probability that PM is perfect or failed depends on the number of imperfect maintenance operations conducted since the previous renewal cycle. Mathematical formulas for expected total production cost per unit time are generated. Optimum PM time that minimizes cost is derived. Various special cases are considered, including the maintenance learning effect. A numerical example is given. 2011 Elsevier Inc. All rights reserved.
منابع مشابه
A Preventive Maintenance Decision Policy Based on Economic-Technical and Applicibility Considerations
The present study is intended to develop a Preventive Maintenance (PM) policy for industrial applications, while considering two different objectives: the first objective is to optimize the total maintenance costs, i.e., the Preventive Maintenance (PM) and Emergency Maintenance (EM) Costs Per Unit Time. (CPUT). The second objective is to design the policy in such a way that the simplicity of it...
متن کاملA Preventive Maintenance Decision Policy Based on Economic-Technical and Applicibility Considerations
The present study is intended to develop a Preventive Maintenance (PM) policy for industrial applications, while considering two different objectives: the first objective is to optimize the total maintenance costs, i.e., the Preventive Maintenance (PM) and Emergency Maintenance (EM) Costs Per Unit Time. (CPUT). The second objective is to design the policy in such a way that the simplicity of it...
متن کاملارائه مدل یکپارچه برنامهریزی تولید ادغامی با هزینه نگهداری و تعمیرات
One kind of mid-term production system, aggregate production planning, identifies the optimum production plan for each production period. The goal of aggregate production planning is to forecast future demand swings. On the other hand, maintenance system identifies the proper time for preventive maintenance and restrains from break downs and reduces maintenance costs. Due to the importance of...
متن کاملAdaptive policy of buffer allocation and preventive maintenance actions in unreliable production lines
The buffer allocation problem is an NP-hard combinatorial optimization problem, and it is an important design problem in manufacturing systems. The research proposed in this paper concerns a product line consisting of n unreliable machines with n − 1 buffers and a preventive maintenance policy. The focus of the research is to obtain a better trade-off between the buffer level ...
متن کاملBuilding a maintenance policy through a multi-criterion decision-making model
A major competitive advantage of production and service systems is establishing a proper maintenance policy. Therefore, maintenance managers should make maintenance decisions that best fit their systems. Multi-criterion decision-making methods can take into account a number of aspects associated with the competitiveness factors of a system. This paper presents a multi-criterio...
متن کامل