Laser Beam Analysis Using Image Processing
نویسنده
چکیده
The laser beam profiles captured by CCD camera processed and analyzed by using 2Dgraphic and displayed on the monitor. The analysis of the He-Ne profiles and laser diode profiles are presented. The results showed that the He-Ne laser emits a pure Gaussian beam, whereas the diode laser emits an elliptical beam shape. The laser beam profile analysis developed to study the intensity distribution, the laser power, number of modes and the laser beam, these parameters are quite important in many applications such as the medical, industrial and military. The analysis of the image profile can be used in determination the distance of the objects depending on the distribution of the spot contours of the laser beam with its width. As well as it can be used to capturing images to the objects and determining their distance and the shape of the objects.
منابع مشابه
Electronic Laser Speckle Interferometer for Displacement Measurement using Digital Image Processing Technique
Digital speckle image correlation techniques have been successfully proven to be an accurate displacement analysis tool for a wide range of applications. In this paper, a new Electronic Laser Speckle Pattern Interferometer based on Michelson interferometer is designed. An object beam back scattered of an object surface and a reference beam, originating from the same laser light source are super...
متن کاملA method for detecting bubbles in two-phase gas-liquid flow
Detecting bubble in two-phase flow has been a basic issue in two-phase flow systems. A new method for measuring the frequency of bubble formation is presented in this paper. For this purpose, an electronic device was designed and constructed which works based on a change in intensity of laser beam. For this purpose, continues light beam is embedded just above the needle, which is received by a ...
متن کاملAnalysis of the theory of thermal damage in biological tissues caused by Laser beam
Introduction: In laser surgery, the laser beam can evaporate and cut the tissue like a small surgical knife when the tissue temperature is heated to 100 degrees Celsius. a complete understanding of the distribution of damage in both pathologic tissue and surrounding tissue is necessary. Although the test is the most realistic solution for treating medical problems, for this rea...
متن کاملExtended Field Laser Confocal Microscopy (EFLCM): Combining automated Gigapixel image capture with in silico virtual microscopy
BACKGROUND Confocal laser scanning microscopy has revolutionized cell biology. However, the technique has major limitations in speed and sensitivity due to the fact that a single laser beam scans the sample, allowing only a few microseconds signal collection for each pixel. This limitation has been overcome by the introduction of parallel beam illumination techniques in combination with cold CC...
متن کاملA method for bubble volume measurement under constant flow conditions in gas–liquid two-phase flow
Measuring the volume of a bubble, especially at its detachment, is a basic subject in gas-liquid two-phase flow research. A new indirect method for this measurement under constant flow conditions is presented. An electronic device is designed and constructed based on laser beam intensity. This device calculates the frequency of the bubble formation by measuring the total time of the formation p...
متن کامل