All-Optical Signal Processing Subsystems Based on Highly Non-linear Fibers and Their Limitations for Networking Applications
نویسندگان
چکیده
All optical signal processing is a fundamental concept on which the next generation networks will be based. Implementation of key functionalities as multiwavelength regeneration, frequency conversion and high data rate demultiplexing performed all optically becomes a primary target in current research scenario. In this work, demultiplexing of high data rate signals is demonstrated. The base for the functionality is the cross phase modulation occurring in a span of highly non linear fiber. This fiber is designed to have low birefringence, therefore quite adapted for processing polarization dependent processes, which are the base for the achieved functionality. Demultiplexing from 40GHz and 80GHz to 10GHz is demonstrated.
منابع مشابه
All-optical Signal Processing of Fiber Impairments in Dual-Polarization 112 Gbit/s m-ary QAM Coherent Transmission
We have numerically implemented a receiver side all-optical signal processing method, i.e. optical backward propagation (OBP), by dispersion compensating fiber (DCF) and non-linear compensator (NLC) devised by effective negative Kerr non-linear coefficient using two highly non-linear fibers (HNLFs). The method is implemented for the post-processing of fiber transmission impairments, i.e. chroma...
متن کاملFabrication of polymer-SiO2 nanocomposite optical fibers with a new method
At first step polymer optical fibers (POFs) are used in short distance for optical data transmissions. At second step SiO2 nanoparticles were prepared by sonochemical-assisted method. Silica nanoparticles were added to polymer matrix to prepare polymer based nanocomposites. Most of the POF applications are in the medical and electrical devices. There are several methods for fabrication of POFs,...
متن کاملNovel Four-Channel All Optical Demultiplexer Based on Square PhCRR for Using WDM Applications
Ring resonators have always been referred to as a highly flexible structurefor designing optical devices. In this study, we have designed and simulation a fourchannel optical demultiplexer using square photonic crystal ring resonator. The squarelattice constant for this purpose structure is used. The purposed structure has an averagecrosstalk, transmission coefficient, q...
متن کاملApplication of Signal Processing Tools for Fault Diagnosis in Induction Motors-A Review-Part II
The use of efficient signal processing tools (SPTs) to extract proper indices for the fault detection in induction motors (IMs) is the essential part of any fault recognition procedure. The 2nd part of this two-part paper is, in turn, divided into two parts. Part two covers the signal processing techniques which can be applied to non-stationary conditions. In this paper, all utilized SPTs for n...
متن کاملTunable photonic delay lines in optical fibers
A R TI C LE Abstract A comprehensive overview is presented about optical fiber-based tunable photonic delay lines, which have been steadily developed over the last decade for the realization of all-optically controlled timing functions. The most widely used techniques, such as those based on slow & fast light and wavelength conversion associated to dispersion, are described and their physical l...
متن کامل