The Design and Qualification of a Hydraulic Hardware-in-the- Loop Simulator
نویسندگان
چکیده
iii ACKNOWLEDGEMENTS Special thanks go to my advisor, Dr. Book, for his support and guidance throughout this project and to my committee members Dr. Sadegh and Dr. Paredis. Our lab research engineer, James D. Huggins, was instrumental to getting a working system and teaching me the ways of the hydraulic world. This work would not have been possible without the generous support of many companies involved with the Fluid Power and Motion Control Center. Notable contributions for this project came from Siemens, which donated the electric motors, would like to thank my sage officemates, Amir Shenuda and Matt Kontz, for the never ending consultations the shared office obliged them to give.
منابع مشابه
Robust Controller Design Based-on Aerodynamic Load Simulator Identification Driven by PMSM for Hardware-in-the-Loop Simulations
Aerodynamic load simulators generate the required time varying load to test the actuator’s performance in the laboratory. Electric Load Simulator (ELS) as one of variety of the dynamic load simulators should follows the rotation of the Under Test Actuator (UTA) and applies the desired torque to UTA’s rotor at the same time. In such a situation, a very large torque is imposed to the ELS from the...
متن کاملDistance protection closed-loop testing using RTDS
This paper presents a distance protection test procedure by applying the Real-Time Digital Simulator (RTDS) of a power system. RTDS is a tool to design, develop, and test power-system protection. The RTDS enables real-time computation of electromagnetic phenomena with a calculation time step of even 50μs. The hardware allows the import and export of many signals from the simulator to an ext...
متن کاملRobust Attitude Control of Spacecraft Simulator with External Disturbances
The spacecraft simulator robust control through H∞-based linear matrix inequality (LMI) and robust adaptive method is implemented. The spacecraft attitude control subsystem simulator consists of a platform, an air-bearing and a set of four reaction wheels. This set up provides a free real-time three degree of freedom rotation. Spacecraft simulators are applied in upgrading and checking the c...
متن کاملHardware in Loop of a Generalized Predictive Controller for a Micro Grid DC System of Renewable Energy Sources
In this paper, a hardware in the loop simulation (HIL) is presented. This application is purposed as the first step before a real implementation of a Generalized Predictive Control (GPC) on a micro-grid system located at the Military University Campus in Cajica, Colombia. The designed GPC, looks for keep the battery bank State of Charge (SOC) over the 70% and under the 90%, what ensures the bes...
متن کاملModel Based Design approach for Implementation of PHEV Energy Management
Hardware implementation of the Plug-in hybrid electric vehicles (PHEVs) control strategy is an important stage of the development of the vehicle electric control unit (ECU). This paper introduces Model-Based Design (MBD) approach for implementation of PHEV energy management. Based on this approach, implementation of the control algorithm on an electronic hardware is performed using automatic co...
متن کامل