Sensorless Direct Torque Control of Rushless Ac Machine Using Luenberger Observer
نویسندگان
چکیده
The sensorless DTC of Brushless AC (BLAC) machine using Luenberger observer is proposed in this paper. In Direct Torque Control (DTC), accurate rotor position information is not essential. The speed is estimated by Luenberger observer, which used to improve the performance of dynamic tracking and accuracy of the whole system. The speed regulation is realized by a conventional PI regulator. Simulation results shows small overshooting and good dynamic of the speed and torque, low ripples in torque and flux. So we verify the effectiveness of the proposed observer to monitor the drive.
منابع مشابه
A Current-Based Output Feedback Sliding Mode Control for Speed Sensorless Induction Machine Drive Using Adaptive Sliding Mode Flux Observer
This paper presents a new adaptive Sliding-Mode flux observer for speed sensorless and rotor flux control of three-phase induction motor (IM) drives. The motor drive is supplied by a three-level space vector modulation (SVM) inverter. Considering the three-phase IM Equations in a stator stationary two axis reference frame, using the partial feedback linearization control and Sliding-Mode (SM) c...
متن کاملSensorless Backstepping Control Using an Adaptive Luenberger Observer with Three Levels NPC Inverter
In this paper, we propose a sensorless backstepping control of induction motor (IM) associated with three levels neutral clamped (NPC) inverter. First, the backstepping approach is designed to steer the flux and speed variables to theirs references and to compensate the uncertainties. A Lyapunov theory is used and it demonstrates that the dynamic trajectories tracking are asymptotically stable....
متن کاملMRAS state estimator for speed sensorless ISFOC induction motor drives with Luenberger load torque estimation.
This paper presents a novel method for estimating the load torque of a sensorless indirect stator flux oriented controlled (ISFOC) induction motor drive based on the model reference adaptive system (MRAS) scheme. As a matter of fact, this method is meant to inter-connect a speed estimator with the load torque observer. For this purpose, a MRAS has been applied to estimate the rotor speed with t...
متن کاملSensorless Vector Control of AC Induction Motor Using Sliding-Mode Observer
This paper develops a sensorless vector controlled method for AC induction motor using sliding-mode observer. For developing the control algorithm, modeling of AC induction motor is presented. After that, a sliding mode observer is proposed to estimate the motor speed, the rotor flux, the angular position of the rotor flux and the motor torque from monitored stator voltages and currents. The us...
متن کاملNonlinear State-Observer Techniques for Sensorless Control of Automotive PMSM’s, including Load-Torque Estimation and Saliency
The paper investigates various non-linear observer-based rotor position estimation schemes for sensorless control of permanent magnet synchronous motors (PMSMs). Attributes of particular importance to the application of brushless motors in the automotive sector, are considered e.g. implementation cost, accuracy of predictions during load transients, the impact of motor saliency and algorithm co...
متن کامل