Influence of Rubber Size on Properties of Crumb Rubber Mortars
نویسندگان
چکیده
Studies on the properties and applications of rubber cement-based materials are well documented. The sizes of rubbers used in these materials varied. However, information about the effects of rubber size on the properties of rubber cement-based materials, especially pore structure, mechanical strengths, and drying shrinkage properties, remains limited. Three groups of rubber with major particle sizes of 2-4 mm, 1-3 mm, and 0-2 mm were selected in this study. This paper presents experimental studies on the effects of rubber size on the consistency, fresh density, pore structure, mechanical properties, and drying shrinkage properties of crumb rubber mortars (CRMs). Results demonstrated that the consistency and fresh density of CRMs decreased with the rubber size. As to the pore structure, the total pore volume increased with the decrease of the rubber size. By contrast, the influence of the rubber size on the mesopore (<50 nm) volume is not as significant as that of the rubber content. The mechanical properties of CRMs decreased with the rubber size. Low rubber stiffness and large pore volumes, especially those of small sized rubbers, contribute to the reduction of CRMs strength. The drying shrinkage of CRM increases as the rubber size decreases. The influences of rubber size on capillary tension are not significant. Thus, the shrinkage increases with the decrease of rubber size mainly because of its function in the deformation modulus reduction of CRMs.
منابع مشابه
Experimental Study on the Effect of Crumb Rubber on Shear Strength of Sandy Soil
Nowadays, soil reinforcement using polymer elements have been investigated by a number of researchers in order to increase the load capacity of soils. Reinforcing soils using fibers is a method of soil improvement, which offers a homogenous mixture in combination with soils, regarding their tensile strength. This combination maintains pressure loading capacity and properties in mutual resistant...
متن کاملEvaluating the Performance of Crumb Rubber Modified Binders used in Isfahan Province
The performance of asphalt binders at high and low temperatures has an important role on the rutting and crackingresistance of asphalt pavements. Crumb Rubber Modified (CRM) is one of the asphalt modifiers that improves asphaltphysical and mechanical properties and helps reducing environmental pollution. In this research, three unmodifiedand six CRM modified binders were teste...
متن کاملExperimental Investigation of the Mechanical and Durability Properties of Crumb Rubber Concrete
Recycling waste tire rubber by incorporating it into concrete has become the preferred solution to dispose of waste tires. In this study, the effect of the volume content of crumb rubber and pretreatment methods on the performances of concrete was evaluated. Firstly, the fine aggregate and mixture were partly replaced by crumb rubber to produce crumb rubber concrete. Secondly, the mechanical an...
متن کاملPerformance Improvement of Porous Asphalt Mixtures using Crumb Rubber and Steel Slag Powder
In recent decades, porous asphalt has been extended for surface drainage in various regions throughout the world. The permeability of porous asphalt has an important role in the performance of asphalt pavements in the rainy weather. The most remarkable problem related to the porous asphalt is its short service time. Considerable efforts have been made to enhance the mechanical properties of por...
متن کاملCrumb rubber filtration: a potential technology for ballast water treatment.
The removal of turbidity, particles, phytoplankton and zooplankton in water by crumb rubber filtration was investigated. A substantial reduction was achieved. Of the three variables, filter depth, media size and filtration rate, media size had the most significant influence. Smaller media size favored higher removal efficiency of all targeted matter. There was no apparent relationship between r...
متن کامل