The Resistivity of Carbon Fibers /abs Resin Composites

نویسندگان

  • Xiaoyi Liang
  • Licheng Ling
  • Chunxiang Lu
  • Lang Liu
چکیده

Polymers filled with conductive particles and fibers have been widely used in electromagnetic interference (EMI) shielding, electrical static discharge (ESD), and other regions. In these combinations, the carbon fibers filled polymer composites are special interest due to their excellent mechanical properties and high conductivity as well as good durability to environmental conditions. However, a lot research is about the acceleration of material strength and few papers involve the influence of carbon fibers oxidation on the conductivity of the composites. Here, we investigate the influence of carbon fibers oxidation on the conductivity of the materials.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Resistivity and Its Anisotropy Characterization of 3D-Printed Acrylonitrile Butadiene Styrene Copolymer (ABS)/Carbon Black (CB) Composites

The rapid printing of 3D parts with desired electrical properties enables numerous applications. Fused deposition modeling (FDM) using conductive thermoplastic composites has been a valuable approach for such fabrication. The parts produced by FDM possess various controllable structural features, but the effects of the structural features on the electrical properties remain to be determined. Th...

متن کامل

(افزایش مقاومت خمشی کامپوزیتها توسط کشش الیاف (یادداشت فنی

In the present research work, the flexural modulus and strength of glass fiber-epoxy resin and carbon fiber-epoxy resin composites have been enhanced through fiber tension during curing of the polymeric resin. This study showed that the tension applied on the fibers increased the flexural modulus of the glass-epoxy composites up to 12% and the flexural strength up to 19%. The flexural modulus a...

متن کامل

PREDICTING THE STIFFNESS OF BIAXIAL BRAIDED FIBER COMPOSITES BY INCORPORATION OF CARBON NANO FIBER

In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...

متن کامل

Effect of Chopped Carbon Fiber on Electrical and Thermal properties of Carbon Reinforced Epoxy Composites

This work presents an insight into the effect of conductive filler content on both electrical and thermal properties of a polymer composite system. The electrical conductivity of an insulating polymer can be achieved by dispersing conducting fillers (e.g., metal, graphite powder, carbon black, carbon fiber) in the polymer matrix. The resulting materials are referred to as conducting polymer com...

متن کامل

Effect of Filler Type on some Physical and Mechanical Proparties of Carbon Fibers / Polyester Composites

In the present study, traditional and hybrid composites were prepared by Hand lay-up molding and investigated. The composites constituents were unsaturated polyester resin as the matrix, 3% and 6% volume fractions of carbon fibers as reinforcement and 3% of Al2O3, Al, Cement and local Gypsum (calcium sulfate anhydrate CaSO4) as filler particles. The investigated physical properties were density...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003