Shear Strength Prediction of RC Beam-column Sandwich Interior Joints Based on Simplified Softened Strut-and-Tie
نویسندگان
چکیده
Due to the scarcity of rational models for predicting the strength of RC beam-column sandwich joints, a modified simplified softened strut-and-tie model suggests a more rational calculation method for the effective compressive strength and the height of the joint concrete based on the simplified softened strut-and-tie. The shear strength of existing tested 15 sandwich interior joints is calculated by using the modified simplified softened strut-and-tie model. Furthermore, the theory results are compared with those of the code method and those of the simplified softened strut-and-tie model.
منابع مشابه
Strut-and-Tie Method for Prediction of Ultimate Shear Capacity of Shear-Strengthened RC deep beams with FRP
The main objective of this study is to propose the Strut-and-Tie method (STM) to predict the shear capacity of simply supported RC deep beams shear-strengthened with carbon fiber reinforced polymers (CFRP). It is assumed that, the total carried shear force by shear-strengthened RC deep beam provided by three independent resistance, namely diagonal concrete strut due to Strut-and-tie mechanism, ...
متن کاملPerformance-based Optimization of Strut-and-tie Models in Reinforced Concrete Beam-column Connections
This paper presents the performance-based optimization of strut-and-tie models in reinforced concrete beam-column connections. The performance-based optimization (PBO) technique is employed to investigate optimal strut-and-tie models in reinforced concrete beam-column connections. Developing strut-and-tie models in reinforced concrete beam-column connections is treated as a topology optimizatio...
متن کاملA Simple Approach to Predict the Shear Capacity and Failure Mode of Fix-ended Reinforced Concrete Deep Beams based on Experimental Study
Reinforced Concrete (RC) deep beams are commonly used in structural design to transfer vertical loads when there is a vertical discontinuity in the load path. Due to their deep geometry, the force distribution within the RC deep beams is very different than the RC shallow beams. There are some strut and tie model (STM) already been developed for RC deep beams. However, most of these models are ...
متن کاملRefinement of Strut-and-Tie Model for Reinforced Concrete Deep Beams
Deep beams are commonly used in tall buildings, offshore structures, and foundations. According to many codes and standards, strut-and-tie model (STM) is recommended as a rational approach for deep beam analyses. This research focuses on the STM recommended by ACI 318-11 and AASHTO LRFD and uses experimental results to modify the strut effectiveness factor in STM for reinforced concrete (RC) de...
متن کاملPrediction of Shear Strength of PPFRC Moderate Deep Beams Using Strut-and-Tie Models
Strut-and-tie is a system of forces' distribution in the form of "load-path" connectivity from the applied load point to the support point. Strut-and-Tie Method (STM) has been developed based on simple truss model. STM models represent the load carrying mechanism of a structural member by approximating the flow of internal forces by means of struts representing the flow of compressive stresses ...
متن کامل