Material Properties of Titanium Diboride
نویسنده
چکیده
The physical, mechanical, and thermal properties of polycrystalline TiB2 are examined with an emphasis on the significant dependence of the properties on the density and grain size of the material specimens. Using trend analysis, property relations, and interpolation methods, a coherent set of trend values for the properties of polycrystalline TiB2 is determined for a mass fraction of TiB2 ⩾ 98 %, a density of (4.5±0.1) g/cm(3), and a mean grain size of (9±1) µm.
منابع مشابه
Pulsed Laser Deposition of Epitaxial Titanium Diboride Thin Films
Epitaxial titanium diboride thin films have been deposited on sapphire substrates by Pulsed Laser Ablation technique. Structural properties of the films have been studied during the growth by Reflection High Energy Electron Diffraction (RHEED) and ex-situ by means of X-ray diffraction techniques; both kinds of measurements indicate a good crystallographic orientation of the TiB 2 film both in p...
متن کاملNovel nanostructured biomaterials: implications for coronary stent thrombosis
BACKGROUND Nanomedicine has the potential to revolutionize medicine and help clinicians to treat cardiovascular disease through the improvement of stents. Advanced nanomaterials and tools for monitoring cell-material interactions will aid in inhibiting stent thrombosis. Although titanium boron nitride (TiBN), titanium diboride, and carbon nanotube (CNT) thin films are emerging materials in the ...
متن کاملShear strengths of aluminium nitride and titanium diboride under plane shock wave compression
This work compares the estimates of shear strengths of aluminium nitride and titanium diboride obtained (a) from the simultaneous measurements of longitudinal and lateral stress by means of manganin gauges under plane shock wave loading with (b) those calculated from the offset between hydrodynamic and shock Hugoniot of these materials. The results of this work show that whereas the estimates o...
متن کاملFatigue and fracture of a 316 stainless steel metal matrix composite reinforced with 25% titanium diboride
Fatigue and fracture mechanisms have been studied in a steel-based metal matrix composite (MMC), comprising a 316L austenitic matrix reinforced with 25 wt% particulate titanium diboride (TiB2). The fracture toughness was determined in the as-HIPped condition as being slightly below 30 MPa√m. Fatigue crack growth rates have been determined, and corrected for the effects of crack closure. The fra...
متن کاملPenetration Resistance of Armor Ceramics: Dimensional Analysis and Property
A new dimensionless relationship for analysis of ballistic penetration data is derived and applied to polycrystalline ceramic materials. Targets consist of ceramic tiles backed by thick metallic plates within which residual penetration depths have been reported in experimental studies. Particular ceramics analyzed here are lowand high-purity alumina, aluminum nitride, boron carbide, silicon car...
متن کامل