Coupled Simulations of Mechanical Deformation and Microstructural Evolution Using Polycrystal Plasticity and Monte Carlo Potts Models
نویسندگان
چکیده
The microstructural evolution of heavily deformed polycrystalline Cu is simulated by coupling a constitutive model for polycrystal plasticity with the Monte Carlo Potts model for grain growth. The effects of deformation on boundary topology and grain growth kinetics are presented. Heavy deformation leads to dramatic strain-induced boundary migration and subsequent grain fra,omentation. Grain growth is accelerated in heavily deformed microstructures. The implications of these results for the thermomechanical fatigue failure of eutectic solder joints are discussed.
منابع مشابه
3D bulk grain evolution in polycrystalline Cu:comparison between HEDM observation and FFT based crystal plasticity simulations
In this study, microstructural evolution in polycrystalline Cu is studied via high-energy X-ray diffraction micros-copy (HEDM) and compared to the results of a fast Fourier transform (FFT) based small strain formulation of acrystal plasticity (CP) deformation model [1]. The nondestructive nature of the HEDM experiments enable in-situmeasurement of bulk samples, thus allowing acc...
متن کاملA Monte Carlo simulation study of vinblastine and vincristine as clinical drugs
In this study, Monte Carlo statistical mechanical simulations for vinblastine and vincristine werecarried out in standard manner using the Metropolis sampling technique in canonical (T, V, N)ensemble., Geometrical optimizations of vinblastine and vincristine were carried out with the HFmethod coupled to 6-31G(d) basis sets for all atoms. Simulation was done by four force fields ofMM+, BIO+, AMB...
متن کاملMechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering
Crystalline tantalum thin films of about 500nm thickness were deposited on AISI 316L stainless steel substrate using magnetron sputtering. To investigate the nano-mechanical properties of tantalum films, deposition was performed at two temperatures (25°C and 200°C) on TaNx intermediate layer with different N2/Ar flow rate ratio from 0 to 30%. Nano-indentation was performed to obtain the mechani...
متن کاملMulti-length scale design of deformation processes for control of orientation (texture) dependent properties
Design of deformation (thermo-mechanical) processes to achieve desired structural response will be addressed. Plastic deformation is assumed to be accommodated through crystallographic slip and reorientation of crystals. Conventional methodologies towards polycrystal plasticity use an aggregate of single crystals and this choice of the aggregate affects the response of the polycrystal. In order...
متن کاملMonte Carlo Simulations of Conformal Theory Predictions for the 3-state Potts and Ising Models
The critical properties of the 2D Ising and 3-state Potts models are investigated using Monte Carlo simulations. Special interest is given to measurement of 3-point correlation functions and associated universal objects, i.e. structure constants. The results agree well with predictions coming from conformal field theory confirming, for these examples, the correctness of the Coulomb gas formalis...
متن کامل