Towards a tunable and switchable water adhesion on a TiO(2) nanotube film with patterned wettability.
نویسندگان
چکیده
Tunable water adhesion was realized on a TiO(2) nanotube film with patterned wettability formed via selective illumination through a mask. Meanwhile, the adhesion can be switched between sliding superhydrophobicity and sticky superhydrophobicity by masked illumination and heat annealing.
منابع مشابه
Bioinspired TiO2 Nanostructure Films with Special Wettability and Adhesion for Droplets Manipulation and Patterning
Patterned surfaces with special wettability and adhesion (sliding, sticky or patterned superoleophobic surface) can be found on many living creatures. They offer a versatile platform for microfluidic management and other biological functions. Inspired by their precise arrangement of structure and chemical component, we described a facile one-step approach to construct large scale pinecone-like ...
متن کاملConductive Polymer Porous Film with Tunable Wettability and Adhesion
A conductive polymer porous film with tunable wettability and adhesion was fabricated by the chloroform solution of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyricacid-methyl-ester (PCBM) via the freeze drying method. The porous film could be obtained from the solution of 0.8 wt%, whose pore diameters ranged from 50 nm to 500 nm. The hydrophobic porous surface with a water contact an...
متن کاملNovel carbon-doped TiO2 nanotube arrays with high aspect ratios for efficient solar water splitting.
The photocatalytic splitting of water into hydrogen and oxygen using solar light is a potentially clean and renewable source for hydrogen fuel.(1,2) There has been extensive investigation into metal-oxide semiconductors such as TiO(2), WO(3), and Fe(2)O(3), which can be used as photoanodes in thin-film form.(3-5) Of the materials being developed for photoanodes, TiO(2) remains one of the most p...
متن کاملHigh Efficient Transparent TiO2 Nanotube Dye-Sensitized Solar Cells: Adhesion of TiO2 Nanotube Membrane to FTO by Two Different Methods
In order to fabricate transparent TiO2 nanotube dye-sensitized solar cells, anodically growth nanotube membranes are detached from Ti substrate by a re-anodization method. The membranes are transferred on FTO glass by two different methods. At the first one, 100mM Ti-isopropoxide is used to make TiO2 nanoparticles for adhering TiO2 nanotube membranes to FTO and ...
متن کاملCarbon Nanotube Arrays with Tunable Wettability and Their Applications
A combination of UV/ozone and vacuum pyrolysis treatments is introduced to tune the wetting properties of vertically aligned multiwalled carbon nanotube arrays. The UV/ozone treatment renders these arrays superhydrophilic by functionalizing them with oxygenated functional groups. These superhydrophilic arrays have a high affinity to water such that they have a very high specific capacitance in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 45 شماره
صفحات -
تاریخ انتشار 2009