Tailoring the Electrooptic Response and Improving the Performance of Integrated LiNbO3 Modulators by Domain Engineering
نویسندگان
چکیده
Domain inversion (DI) is applied to traveling-wave integrated electrooptic (EO) LiNbO3 modulators to achieve predefined EO frequency response and improved performance with respect to standard single-domain (not domain-inverted) counterparts, including lower driving voltages and larger modulation bandwidths. In particular, when an appropriate poling (DI) is performed along the interaction length, two novel configurations are envisaged. 1) An apodised longitudinal poling profile is used in non-velocity-matched (NVM) modulators to achieve a desired EO response, such as amplitude modulation with intrinsic third-order Bessel-type optical filtering for duobinary transmission. 2) Twosection longitudinal poling is used to counteract the detrimental microwave loss effect in VM modulators and to increase the bandwidth to driving voltage ratio, achieving a value up to 50% larger than that of single-domain (unpoled) structure.
منابع مشابه
Ultra High Speed LiNbO3 and Polymer Electrooptic Modulators in Lightwave Optical Access Communication Networks
In the present paper, we have been modeled parametrically and numerically the high speed of materials based electrooptic (EO) modulators in advanced optical communication systems. The modulated bandwidth is deeply and parametrically studied over wide ranges of the affecting sets of parameters via specially designed software which processes the interaction of causes and effects. The design param...
متن کاملFull-Wave Comparison of Z-cut and X-cut Lithium Niobate (LiNbO3) Electrooptic Modulators Using Finite Element Method
In this study we compare the relative merits of Z-cut and X-cut lithium niobate (LN) electrooptic modulators. The finite element method (FEM) has been used to implement a full wave analysis of the two structures and determine the microwave effective index Nm, the characteristic impedance Zc, the microwave losses αc and the half wave voltage VπL, operating at frequency range from 0.1 to 100GHz. ...
متن کاملSimulation and Design of an Organic Quantum Film Electrooptic Switch
In this paper the simulation and design of a quantum-film electro-optic switch is considered. This photonic device, is made from a new organic dipolar material called MNA or 2-methyl-4 nitroaniline, which possesses a high merit in comparison with it's inorganic counterparts (e.g. LiNbO3, GaAs, InSb, Quartz, etc). Montecarlo method is used to simulate the photon-it-electron interaction in this m...
متن کاملTime-Mode Signal Quantization for Use in Sigma-Delta Modulators
The rapid scaling in modern CMOS technology has motivated the researchers to design new analog-to-digital converter (ADC) architectures that can properly work in lower supply voltage. An exchanging the data quantization procedure from the amplitude to the time domain, can be a promising alternative well adapt with the technology scaling. This paper is going to review the recent development in t...
متن کاملCharacteristic Analysis of Traveling Wave Electrooptic Modulators on Lithium Niobate Substrate
The characteristic analysis of traveling wave electrooptic modulators on z-cut and x-cut lithium niobate substrates is carried out by using the finite element method based on a quasi-TEM approximation. The microwave effective index, the characteristic impedance, and the frequency dependent attenuations are calculated. The optical frequency response is also calculated and hence the 3-dB optical ...
متن کامل