A quick and inexpensive method for composite button fabrication.

IN-SITU FABRICATION PROCESS OF AL- TIC COMPOSITE BY SLAG

The new in situ method for AI-TiC composite fabrication has been carried out. In this method, fabrication of AI-TiC composite by simultaneous introduction of titanium oxide and carbon into aluminum melt was investigated.. Under the process conditions, titanium and carbon reaction results in titanium carbide whiskers. The salt containing keriolite (Na3AIF6), titanium oxide (TiO2) and graphite us...

Central composite experimental design applied to fabrication of LLDPE microporous membrane via thermally induced phase separation (TIPS) method

Fabrication and inspection of C/Cf-ZrB2-ZrC-SiC and C/Cf-ZrB2-SiC composite parts resistant to ablation by pressureless sintering method

In this research, the aim is to achieve strong and ablation-resistant composite parts C / Cf-ZrB2-ZrC-SiC and C / Cf-ZrB2-SiC by non-pressure sintering method. C / Cf-ZrB2-SiC samples were prepared using synthesized ZrB2 and SiC powders between layers of resin-impregnated carbon fabric. After pressing with pressure 5 times at 1600 وC and heat treatment for 2 hours in a controlled atmosphere fur...

Dissolution and Regeneration of the Produced Nano Bacterial Cellulose of Food Industries Wastewaters by a Cost-Benefit Method

This paper applied a simple and cost-benefit method for the production of regenerated bacterial cellulose. The inexpensive production of cellulose with complex media derived from wastewater from food industries such as molasses adds a lot of contaminants to the produced bacterial cellulose, which puts a lot of challenges in cellulose purification. Therefore, the present study aimed...

Fabrication of PGS/CaTiO3 Nano-Composite for Biomedical Application

Biodegradable elastomeric materials are gaining extensive attention in the field of soft tissue engineering. Poly (glycerol sebacate) (PGS) is a novel biocompatible elastomer in this scope. However this polymer has poor mechanical properties especially when the molar ratio of glycerol is higher than sebacic acid. Calcium Titanate (CaTiO3) is a biocompatible ceramic with some degr...