A sample holder for in-house X-ray powder diffraction studies of protein powders
نویسندگان
چکیده
منابع مشابه
A Novel Sample-handling Approach for Xrd Analysis with Minimal Sample Preparation
Powder diffraction ideally requires a very large number of crystallites in random orientations to be exposed to the X-ray beam. This is obtained in laboratory instruments by grinding the sample to a very fine grain size (< 10 µm) or by using fine-grained polycrystalline solids. When non-ideal powders are being characterized, one must find a means of increasing the number of crystallite orientat...
متن کاملMICROSTRUCTURE STUDY ON AL-5%SiC NANOCOMPOSITE POWDERS
Abstract: In this study Al-5 (Vol) % SiCp nanocomposite powder has been successfully synthesized by high-energy planetary milling of Al and SiC powders for a period of 25 h at a ball-to-powder ratio of 15:1. The changes of the lattice strain, the crystallite size of the matrix phase, and the nanocomposite powder microstructure with time have been investigated by X-ray diffraction (XRD), X-ray m...
متن کاملStructural Characterization and Ordering Transformation of Mechanically Alloyed Nanocrystalline Fe-28Al Powder
The synthesis of nanocrystalline Fe3Al powder by mechanical alloying as well as the structural ordering of the synthesized Fe3Al particles during the subsequent thermal analysis were investigated. Mechanical alloying was performed up to 100 hours using a planetary ball mill apparatus with rotational speed of 300 rpm under argon atmosphere at ambient temperature. The synthesized powders were cha...
متن کاملبررسی فازی ترکیبات Mo + 2(1 - x) Si + 2xAl
X-ray powder diffraction data for Mo2.85Al1.91Si4.81 are presented here. The new Mo2.85Al1.91Si4.81 compound was successfully prepared, using the self-propagating high-temperature synthesis (SHS) technique. The starting atomic mixture of reactant powders was Mo + 2(1 - x)Si + 2xAl with 0.2 ≤ x ≤ 0.5. The final powder compound obtained by the SHS technique was determined to be in x = 0.2; Mo(Si,...
متن کاملLa0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study
In this study the characteristics of two different kinds of La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) powders, one in-house synthesized powder by a co-precipitation method and another one purchased from Fuel Cell Materials Co. (FCM Co., USA), were compared. The co-precipitated powder was prepared by using ammonium carbonate as precipitant with a NH4+/NO3- molar ratio of 2 and calcination at 1000C for 1 h....
متن کامل