Enhancement of Critical Heat Flux From High Power Microelectronic Heat Sources in a Flow Channel
نویسندگان
چکیده
Several surface augmentation techniques were examined in an investigation of enhancement of critical heat flux (CHF) from a simulated electronic chip to a fluorocarbon (FC-72) liquid in a vertical channel. A parametric comparison of boiling performances is presented for a smooth surface and for surfaces with low-profile microgrooves, low-profile microstuds, and high-profile pin fins. Critical heat fluxes as high as 361 W/cm were achieved using a combination of moderate flow velocity, high subcooling and surface enhancement. A semiempirical model constructed previously for CHF from a smooth discrete heat source to saturated or subcooled liquid flow, was found successful in correlating CHF data for the three enhanced surfaces.
منابع مشابه
Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube
In the present work, the critical heat flux measurements were performed for the subcooled flow boiling of pure water and magnetic nanofluids (i.e., water + 0.01 and 0.1 vol.% Fe3O4) in a vertical tube. The effect of applying an external magnetic field on the CHF variation was studied experimentally as well. The obtained results indicated that the subcooled flow boiling CHF in the vertical tub...
متن کاملSingle- and Two-Phase Convective Heat Transfer From Smooth and Enhanced Microelectronic Heat Sources in a Rectangular Channel
Experiments have been performed to assess the feasibility of cooling microelectronic components by means of single-phase and two-phase forced convection. Tests were conducted using a single heat source flush mounted to one wall of a vertical rectangular channel. An inert fluorocarbon liquid (FC-72) was circulated upward through the channel at velocities up to 4.1 m/s and with subcooling up to 4...
متن کاملDetermination of Thermal Resistance in Three-Dimensional Analysis of Micro-Channel Heat Sink with Non - Newtonian Fluids
Micro-Channel Heat Sink is a heat exchanger which is used to control the temperature of electronic devices with high heat flux. A comprehensive thermal model for the micro-channels should include three dimensional conduction analysis in the solid body together with three dimensional developing fluid flow as well as heat transfer analyses in the fluid section. This paper reports on a research ...
متن کاملDetermination of Thermal Resistance in Three-Dimensional Analysis of Micro-Channel Heat Sink with Non - Newtonian Fluids
Micro-Channel Heat Sink is a heat exchanger which is used to control the temperature of electronic devices with high heat flux. A comprehensive thermal model for the micro-channels should include three dimensional conduction analysis in the solid body together with three dimensional developing fluid flow as well as heat transfer analyses in the fluid section. This paper reports on a research ...
متن کاملThe Effect of Viscous Dissipation and Variable Properties on Nanofluids Flow in Two Dimensional Microchannels
Laminar two dimensional forced convective heat transfer of Al2O3 –water nanofluid in a horizontal microchannel has been studied numerically, considering axial conduction, viscous dissipation and variable properties effects. The existing criteria in the literature for considering viscous dissipation in energy equation are compared for different cases and the most proper one is applied for the re...
متن کامل