Radiation Characteristics of a Square Pyramidal Horn Antenna with Tapered DielectricE-Plane Boundary Walls Loaded With Periodic Conducting Strips
نویسنده
چکیده
A rectangular pyramidal horn antenna fabricated with tapered dielectric E-plane boundary walls whose inner surface is periodically loaded with thin conducting strips is investigated. For better impedance matching, at the throat region of the horn antenna, 3 cm portion is metallised. The radiation characteristics of this horn antenna are compared with that of an identical conventional horn antenna with conducting E-plane boundary walls. Considerable improvement in the E-plane radiation characteristics is observed. As H-plane boundary walls are not modified, no change in the H-plane radiation characteristics is observed. However,the conventional horn antenna shows slightly better impedance matching than the test horn antenna.
منابع مشابه
Groove Gap Waveguide (GGW) H-plane Horn Antenna and a Method for Its Back lobe Suppression
recently a new structure called groove gap waveguide (GGW) is introduced to implement low loss microwave component devices especially for millimeter wave applications. This paper presents a new type of H-plane horn antenna making use of this new technology in which backward radiation is significantly suppressed by introducing a high impedance surface at the antenna aperture. The high impe...
متن کاملModified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملDevelopment of an Enhanced Gain Substrate Integrated Waveguide H-plane Horn Antenna Using Thin Substarte
In this paper a dual band and high gain H-plane horn antenna implemented by substrate integrated waveguide (SIW) using a single layer thin substrate is introduced. The proposed antenna consists of five parts of rectangular waveguide with different width arranged in a staircase manner to allow mode combination of fundamental and higher propagating modes of the structure. By adjusting the length ...
متن کاملUWB Planar Conical Horn-Shaped Self-Complementary Bow-Tie Antenna
An ultra-wideband (UWB) self-complementary planar bow-tie antenna (SCPBTA) is proposed. The antenna consists of a printed conical horn-shaped (CHS) radiator and a counterpart CHS slot etched on a rectangular ground plane. The printed CHS radiator is connected directly to the 50Ω microstrip line by bending the end portion of the feed line. As a result, the antenna has a simple structure which do...
متن کاملDevelopment of Low Profile Substrate Integrated Waveguide Horn Antenna with Improved Gain
In this paper a new low profile Substrate Integrated Waveguide (SIW) probe-fed H-plane horn antenna structure with improved gain is proposed. The proposed antenna consists of two waveguides including a rectangular and a taper one, in which both, first and third modes of the structure are simultaneously excited leading to a uniform field distribution along the radiating aperture of the antenna a...
متن کامل