Evaluation of Effectiveness of Raw Materials and Materials Use in a Blast Furnace Department of a Steelworks
نویسنده
چکیده
E. Kardas, Z. Skuza Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Czestochowa, Poland The paper analyses the quality of raw materials used in the production of blast furnace pig iron. The ferruginous sinter and pellets are the basic raw materials used in the process. The paper presents the impact of those raw materials quality on the effectiveness of the blast furnace process. The process effectiveness will be specified by means of selected process parameters.
منابع مشابه
Technical Effects of Air Cooled Blast Furnace Slag on Asphalt Mixtures
Air cooled blast furnace slag is a by product made of gradually air cooled molten blast furnace slag and is often stored in stockpiles near the iron mills and usually occupy a wide area around the iron mills. From this perspective the further use of these materials can have its own merits. Air cooled blast furnace slag can be used in asphalt mixtures because of their proper frictional propertie...
متن کاملProduction and Crystallization Behavior of an Iron Rich Glass–Ceramic Prepared by Ironmaking and Steelmaking Wastes
Using wastes as starting raw materials is a common method to reduce the production costs and the environmental pollution problems arising from such wastes. In this study the production and crystallization behavior of an iron rich glass prepared by iron and steel making wastes has been investigated. The raw materials used, were the blast furnace slag, the blast furnace dust, converter slag and s...
متن کاملRecycling Evaluation of Mill Scale in Electric Arc Furnace
A considerable amount of mill scale is generated from steelmaking plants annually. Although some industries use it as raw material however, since it contains iron in the form of FeO, Fe2O3, and Fe3O4, it can be considered as a valuable metallurgical raw material for iron and steelmaking industry as well. Thus, the aim of this study was to evaluate the possibility, efficiency, and consequences o...
متن کاملLimiting Phenomena Related to the Use of Iron Ore Pellets in a Blast Furnace
Most of the iron in the world is produced using a blast furnace process, which has iron ore (iron oxides) and coke as its raw materials. When pellets are used in a blast furnace, the iron burden material is charged in the form of pellets and fine, iron-rich by-products are charged typically in the form of cold-bonded briquettes at the top of the blast furnace. Coke is the primary fuel and reduc...
متن کاملEFFECTS OF SILICA MODULUS AND ALKALI CONCENTRATION ON ACTIVATION OF BLAST-FURNACE SLAG
Abstract: The use of alkali-activated cementitious materials especially over the past decades has significantly been increased. The goal of this research is to investigate the effects of silica modulus and alkali concentration on alkali-activation of blast-furnace slag. In this research, the most important physical characteristics of cementitious systems, i.e. the 28-day compressive strength...
متن کامل