Avalanche Multiplication and Breakdown in 4H-SiC Diodes
نویسندگان
چکیده
The measured photomultiplication and excess noise characteristics of two 4H-SiC p-i-n diodes, with i-region widths of 0.105 μm and 0.285 μm, were modelled using a nonlocal multiplication model to determine the ionization threshold energies and the impact ionization coefficients of 4H-SiC. The modelled ionization coefficients accurately predicted the breakdown voltage of a 0.485 μm p-i-n structure. The breakdown voltage of 4H-SiC calculated using these parameters is approximately 7.2 and 4.6 times higher than that of similar Si and Al0.8Ga0.2As structures respectively. Dead space, the minimum distance required for carriers to equilibrate in the electric field, has to be taken into account to accurately predict the breakdown voltage in thin devices.
منابع مشابه
4H-SiC Diode Avalanche Breakdown Voltage Estimation by Simulation and Junction Termination Extension Analysis
This paper presents and compares different avalanche breakdown voltage estimation methods in 4H-SiC (silicon carbide) using finite element simulation results on Schottky diode. 4H-SiC avalanche breakdown voltage and depletion width estimated with Baliga’s equations have shown to be higher than other estimation techniques and simulation results, especially for voltages higher than 5kV. This pape...
متن کامل4,308V, 20.9 mO·cm 4H-SiC MPS Diodes Based on a 30μm Drift Layer
This paper reports the design, fabrication and characterization of high voltage 4H-SiC merged PiN/Schottky-barrier (MPS) diodes with an active area of 1.4mm. For comparison purposes, Schottky barrier, PiN and MPS diodes of smaller size (8.1x10mm) have also been designed and fabricated on the same wafer with a 30μm, n=2x10cm doped drift layer. The Schottky spacing between the adjacent p+ regions...
متن کاملBREAKDOWN DEGRADATION ASSOCIATED WITH ELEMENTARY SCREW DISLOCATIONS IN 4H-SiC PN JUNCTION RECTIFIERS
It is well-known that SiC wafer quality deficiencies are delaying the realization of outstandingly superior 4H-SiC power electronics. While efforts to date have centered on eradicating micropipes (i.e., hollow core super-screw dislocations with Burgers vector > 2c), 4H-SiC wafers and epilayers also contain elementary screw dislocations (i.e., Burgers vector = 1c with no hollow core) in densitie...
متن کاملMonte Carlo Simulation of Multiplication Factor in PIN In0.52Al0.48As Avalanche Photodiodes
In this paper, we calculate electron and hole impactionization coefficients in In0.52Al0.48As using a Monte Carlo modelwhich has two valleys and two bands for electrons and holesrespectively. Also, we calculate multiplication factor for electronand hole initiated multiplication regimes and breakdown voltagein In0.52Al0.48As PIN avalanche photodiodes. To validate themodel, we compare our simulat...
متن کاملDesign and fabrication of planar guard ring termination for high-voltage SiC diodes
An optimized multiple ̄oating guard ring structure is investigated for the ®rst time as an edge termination method for high voltage 4H-SiC planar devices. Simulations were performed to investigate SiC guard ring termination, and determine the optimum guard ring spacing for planar diodes with up to four ̄oating rings. Simulated optimized designs predicted breakdown values from 40% of the ideal b...
متن کامل