Laboratory stresses and tractional forces on the TMJ disc surface.

نویسندگان

  • J C Nickel
  • L R Iwasaki
  • M W Beatty
  • D B Marx
چکیده

The etiology of degenerative disease of the TMJ may involve fatigue produced by surface tractional forces and compressive stresses. This study tested the time-dependent effects of compressive loading and stress-field translation on TMJ disc-surface tractional forces and stresses. In laboratory experiments with 50 porcine discs, an acrylic indenter imposed 10 N static loads for 10 and 60 sec, followed by translation of the loaded indenter along the mediolateral axis of the disc. Maximum tractional forces were found to occur following 60 sec of static loading (p < 0.001), and increased with translation velocity (R(2) = 0.73); whereas maximum compressive stresses occurred after 10 sec of static loading (p < 0.001). Overall, the results were consistent with current mechanical theories of the time-dependent effects of compressive loading of cartilage.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Static and dynamic loading effects on temporomandibular joint disc tractional forces.

UNLABELLED Mechanical fatigue-related degeneration of the temporomandibular joint (TMJ) disc may be promoted by tractional forces. This study tested the hypotheses that tractional forces following static loading of the TMJ disc: (1) increase with compressive strain at the start of movement, and (2) are velocity-dependent during movement. Sixty-four porcine discs received a 10-N static load via ...

متن کامل

Distribution of stress on TMJ disc induced by use of chincup therapy: assessment by the finite element method

OBJECTIVE To assess the distribution of stress produced on TMJ disc by chincup therapy, by means of the finite element method. METHODS a simplified three-dimensional TMJ disc model was developed by using Rhinoceros 3D software, and exported to ANSYS software. A 4.9N load was applied on the inferior surface of the model at inclinations of 30, 40, and 50 degrees to the mandibular plane (GoMe). ...

متن کامل

Structure and Function of the TMJ Disc and Disc Attachments

The TMJ disc is a fibrocartilage tissue, biconcave and elliptical in shape. The disc provides low friction articulation surfaces in the joint. Moreover, its biconcave profile allows a smooth articulation between two incongruent surfaces of the mandibular condyle and the articular eminence. Without the TMJ disc, the incongruent surfaces would have a small area of contact, creating concentrated s...

متن کامل

Three-dimensional finite element analysis on the effects of partial anodontia and its restoration to the stress distribution in temporomandibular joint

Objectives: To investigate the effects of teeth apical stress changes caused by teeth missing and its restoration on the temporomandibular joint (TMJ) stresses. Materials and Methods: The apical stresses measured from photo-elastic experiments (2Kg centric vertical loading to different kinds of occlusion separately) were applied to the established three-dimension finite elemental model. The str...

متن کامل

Steady Thermal Stresses in a Thin Rotating Disc of Finitesimal Deformation with Mechanical Load

Seth’s transition theory is applied to the problems of thickness variation parameter in a thin rotating disc by finite deformation. Neither the yield criterion nor the associated flow rule is assumed here. The results obtained here are applicable to compressible materials. If the additional condition of incompressibility is imposed, then the expression for stresses corresponds to those arising ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of dental research

دوره 83 8  شماره 

صفحات  -

تاریخ انتشار 2004