Design of an Oximeter Based on LED-LED Configuration and FPGA Technology
نویسندگان
چکیده
A fully digital photoplethysmographic (PPG) sensor and actuator has been developed. The sensing circuit uses one Light Emitting Diode (LED) for emitting light into human tissue and one LED for detecting the reflectance light from human tissue. A Field Programmable Gate Array (FPGA) is used to control the LEDs and determine the PPG and Blood Oxygen Saturation (S(p)O(2)). The configurations with two LEDs and four LEDs are developed for measuring PPG signal and Blood Oxygen Saturation (S(p)O(2)). N-LEDs configuration is proposed for multichannel S(p)O(2) measurements. The approach resulted in better spectral sensitivity, increased and adjustable resolution, reduced noise, small size, low cost and low power consumption.
منابع مشابه
An Isolated Off-Line High Power Factor Electrolytic Capacitor-Less LED Driver with Pulsating Output Current
One of the most efficient lighting technology is based on light-emitting diodes (LEDs). Common LED drivers with AC-input (50-60Hz) usually require a bulk electrolytic capacitor to decrease low-frequency ripple in the output. However, the critical element that limits the lifespan of the LED driver is the electrolytic capacitor. An isolated off-line LED driver is proposed in this paper, in which ...
متن کاملSelf authentication path insertion in FPGA-based design flow for tamper-resistant purpose
FPGA platforms have been widely used in many modern digital applications due to their low prototyping cost, short time-to-market and flexibility. Field-programmability of FPGA bitstream has made it as a flexible and easy-to-use platform. However, access to bitstream degraded the security of FPGA IPs because there is no efficient method to authenticate the originality of bitstream by the FPGA pr...
متن کاملInnovations in Sustainable Earthquake Resisting Rocking Wall-Frames
This paper introduces a novel design concept for the development of efficient, sustainable Rocking-Wall Moment Frames (RWMFs) under seismic conditions. The proposed concepts lead to a novel structural configuration with provisions for Collapse Prevention (CP), Self-Centering (SC), reparability, performance control (PC), damage reduction, and energy based seismic analysis. It introduces the meri...
متن کاملThe Realization of LED Display System Based on the Embedded
In this paper, a design of LED display control system based on ARM and FPGA is proposed, according to module structure characteristics of the RGB three colors LED display and the dynamic scanning display of the LED display which is achieved by FPGA technology, this system uses ARM chip S3C2240 as the control core. with the help of the programmable logic device auxiliary, it completed the data s...
متن کاملAn Efficient LUT Design on FPGA for Memory-Based Multiplication
An efficient Lookup Table (LUT) design for memory-based multiplier is proposed. This multiplier can be preferred in DSP computation where one of the inputs, which is filter coefficient to the multiplier, is fixed. In this design, all possible product terms of input multiplicand with the fixed coefficient are stored directly in memory. In contrast to an earlier proposition Odd Multiple Storage ...
متن کامل