Health risk assessment of exposures to a high molecular weight plasticizer present in automobile interiors.
نویسندگان
چکیده
This study provides an exposure and risk assessment of diundecyl phthalate (DUP), a high molecular weight phthalate plasticizer present in automobile interiors. Total daily intake of DUP was calculated from DUP measured in wipe samples from vehicle seats from six automobiles. Four of the vehicles exhibited atypical visible surface residue on the seats. Two vehicles with no visible surface residue were sampled as a comparison. DUP was the predominant organic compound identified in each of the wipes from all seats. A risk assessment of DUP via oral, dermal, and inhalation routes resulting from contact with automobile seats was conducted. The mean, standard deviation, and maximum DUP concentrations on the seats with visible surface residue were 6983 ± 7823 μg/100 cm2 and 38300 μg/100 cm2, respectively. The mean and 95th percentile of the mean for daily cumulative dose of DUP for all exposure routes for the seats with no visible surface residue ranged from 7 × 10-4 to 4 × 10-3 mg/kg-day and from 8 × 10-4 to 5 × 10-3 mg/kg-day, respectively. For seats with visible surface residue, cumulative doses ranged from 2 × 10-3 to 2 × 10-2 mg/kg-day and from 4 × 10-3 to 2 × 10-2 mg/kg-day, respectively. The estimated daily intake (contact or absorbed dose) of DUP from automobile seats were far lower than the NOAELs reported in and derived from animal studies, and are well below the reported Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) Derived No Effect Levels (DNELs) for the general population. Based on this analysis, using virtually any benchmark for evaluating safety, exposure to DUP via automobile seat covers did not pose a measureable increased health-risk in any population under any reasonably plausible exposure scenario.
منابع مشابه
Postural Ergonomic Risk Assessment (Pera) in The Workers of the Automobile Parts Assembly Line: A New Observational Method for the Cube Model
Assembly lines are associated with health risk and musculoskeletal disorders, particularly in the upper limbs. The aim of this study was to analyze three risk factors of posture, duration and force by using the postural ergonomic risk assessment (PERA) method in the workers of the assembly unit of automobile parts. Material and Methods: This descriptive cross-sectional study was conducted in th...
متن کاملAssessment of health risks of exposure to hazardous chemicals by semi-quantitative method in a gas refinery complex
Background: Gas refining is a process in which workers are exposed to different chemicals. This study aimed to assess the health risks caused by exposure to these substances in order to determine hazardous jobs and to present controlling methods. Materials and Methods: This cross-sectional study was performed on the workers at gas refinery in 2015. The sample included all the staff in operat...
متن کاملارزیابی ریسک بهداشتی مواجهه با فیوم کل در فرآیندهای مختلف جوشکاری یک صنعت خودروسازی
Introduction: Risk assessment of Toxic or hazardous chemicals enables the Industrial Hygienists to make the appropriate decision in providing healthy work place. This project was conducted in an assembling plant,(4workshop) of an Automobile Industry in IRAN with 2 types of welding operations, including GMAW (CO2 welding) and Spot resistance welding operations. . Method and Materials: Welders...
متن کاملAssessment of Sources and Health Risks of Polycyclic Aromatic Hydrocarbons (PAHs) in the Street Dust of Dezful City
Street dust is mainly affected by the pollution of polycyclic aromatic hydrocarbons (PAHs). PAHs are a group of organic pollutants consisting of two or more benzene rings and are mainly produced during incomplete combustion. PAHs have attracted widespread attention due to their high carcinogenic and mutagenic properties in humans. Therefore, the purpose of this study was to investigate the sour...
متن کاملارزیابی ریسک بهداشتی مواجهه شغلی با عوامل زیان آور شیمیایی : مطالعه موردی در یک صنعت پتروشیمی
Background and aims In the most chemical process industries, workers are exposed to various chemicals and working with these chemicals without considering safety and health considerations can lead to different harmful symptoms. For deciding about control measures and reducing risk to acceptable level , it is necessary to assess the health risk of exposing to harmful chemicals by aid of specif...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemosphere
دوره 167 شماره
صفحات -
تاریخ انتشار 2017