A Split-Block Waveguide Directional Coupler
نویسنده
چکیده
A simple waveguide directional coupler is described which uses the split-block type of construction common in millimeter-wave components. The coupler uses an array of metal probes suspended on quartz stand-offs. Depending on the number of coupling elements, the coupling can be in the range 15-30 dB, with typically ± 2 dB variation across the waveguide band, and directivity > 10 dB. The coupler, intended for injecting local oscillator power into a waveguide mixer, can be scaled for operation in any waveguide band.
منابع مشابه
A novel design for all-optical NAND/NOR/XOR gates based on nonlinear directional coupler
In this paper a novel all-optical logic NAND, NOR and XOR gate based on nonlinear directional coupler theory is demonstrated. We use the identical structure which contains three waveguides, for designing these gates; the only difference however, is the power of inputs light beam. In other words, while a beam with 4 W/μm in power considered as logical one, the output is NAND gate and if a beam w...
متن کاملA novel design for all-optical NAND/NOR/XOR gates based on nonlinear directional coupler
In this paper a novel all-optical logic NAND, NOR and XOR gate based on nonlinear directional coupler theory is demonstrated. We use the identical structure which contains three waveguides, for designing these gates; the only difference however, is the power of inputs light beam. In other words, while a beam with 4 W/μm in power considered as logical one, the output is NAND gate and if a beam w...
متن کاملThe Design of half-subtractor Logic Function Based on Nonlinear Directional Coupler
In this paper a novel design of all-optical half-subtractor based on nonlinear directional coupler is proposed. By using four waveguides and appropriately adjusting the refractive indices and selecting the proper length of waveguides, halfsubtractor function can be obtained. The operation of this function is simulated by RSoft CAD-Layout (BeamPROP) simulator. The simulation results confirm the ...
متن کاملThe Design of half-subtractor Logic Function Based on Nonlinear Directional Coupler
In this paper a novel design of all-optical half-subtractor based on nonlinear directional coupler is proposed. By using four waveguides and appropriately adjusting the refractive indices and selecting the proper length of waveguides, halfsubtractor function can be obtained. The operation of this function is simulated by RSoft CAD-Layout (BeamPROP) simulator. The simulation results confirm the ...
متن کاملAnalysis and Design of an Ultra Wideband Directional Coupler
Abstract—In this paper, a novel wideband directional coupler using coplanar waveguide multilayer slot-coupled technique is presented and implemented. The coupler uses two coplanar waveguide lines etched on two layers and coupled through an hexagonal slot etched on the common ground plane located between these layers. Firstly, conformal mapping techniques were used to obtain analytic closed-form...
متن کامل