The Typical Number of Antiprotons Necessary to Heat the Hot Spot in the D - T Fuel Doped with U
نویسنده
چکیده
In Ref. [2] the use of the annihilation of antiprotons to heat the compressed thermonuclear fuel was proposed. According to Ref. [2], the antiprotons should annihilate on the nuclei of the fuel. Later, the use of annihilation of antiprotons on the heavy nuclei was also discussed [8-10]. The advantage of this reaction is that the ranges of some of its products in the fuel are rather short [8-10]. This enables the realization of the fast ignition of microexplosions [8-10].
منابع مشابه
Study of flow and heat transfer characteristics in a periodic zigzag channel for cooling of polymer electrolyte fuel cells
In this study, a periodic zigzag channel with rectangular cross-section has been used in order to obtain a high-efficiency system for cooling a polymer electrolyte fuel cell. An appropriate function of fuel cells and enhancement of their lifetime require uniform temperature conditions of around 80°C. On the other hand, due to volume and weight constraints, a low-density compact heat exchanger i...
متن کاملبررسی بهره همجوشی اشتعال سریع با هدفهای مخروطی
Fast ignition is a new scheme for inertial confinement fusion (ICF). In this scheme, at first the interaction of ultraintense laser beam with the hohlraum wall surrounding a capsule containing deuterium-tritium (D-T) fuel causes implosion and compression of fuel to high density and then laser produced protons penetrate in the compressed fuel and deposit their energy in it as the ignition hot sp...
متن کاملSimulation of Subcooled Flow Boiling Occurring in Internal Combustion Engine Water Jacket by Numerical Modeling in a Channel with Hot Spot
Boiling heat transfer always has been proposed as a solution for enhancing heat transfer between the fluid and solid surfaces. Subcooled flow boiling is one of the mechanisms that occur in Internal Combustion Engine water jacket in which high amounts of heat is transferred. In this research, it has been tried to simulate subcooled flow boiling in a geometry similar to coolant channel inside the...
متن کاملمقایسه موردی روشهای مختلف تعیین تنش هاتاسپات در جزئیات سازه کشتی
Fatigue analysis and estimation of safe life of structures that are subjected to cyclic loadings, such as ships and offshore structures is one of the most important steps of structural design. Fatigue failure in the form of crack will start from details and propagate in structure. In steel structures these cracks will started from welds. Most of the methods for fatigue life assessment in welded...
متن کاملApplication of Combustion Hot Spot Analysis to Process Furnace with Arbor Coils
Hot spots are among the most serious operational issues in furnaces as they may result in the destruction of tubes. Hence, it is essential to locate such hot spots precisely on the tube surfaces inside the industrial furnaces in order to secure a safe design and operation. In the current study, we have extended the model proposed by Talmor in order to precisely locate the combustion hot spots o...
متن کامل