Effect of Biodiesel on the Performance and Combustion Parameters of a Turbocharged Compression Ignition Engine
نویسندگان
چکیده
Direct injection compression ignition engines have proved to be the best option in heavy duty applications like transportation and power generation, but rapid depleting sources of conventional fossil fuels, their rising prices and ever increasing environmental issues are the major concerns. Alternate fuels, particularly biofuels are receiving increasing attention during the last few years. Biodiesel has already been commercialized in the transport sector. In the present work, a turbocharged, intercooled, DI diesel engine has been alternatively fuelled with biodiesel and its 20% blend with commercial diesel. The experimental results show that BSFC, maximum combustion pressure and start of injection angle increase; on the other hand BSEC, maximum rate of pressure rise, ignition lag and premixed combustion amount decrease; however HRR duration remains almost unaffected in the case of biodiesel as compared to commercial diesel.
منابع مشابه
Effect of Initial Temperature and EGR on Combustion and Performance Characteristics of Homogenous Charge Compression Ignition Engine Fueled with Dimethyl Ether
Homogeneous Charge Compression Ignition (HCCI) combustion is a pioneer method of combustion in which pre-mixed fuel and oxidizer (typically air) are compressed to the point of auto-ignition. HCCI engines can operate with most alternative fuels, especially, dimethyl ether (DME) which has been tested as a possible diesel fuel due to its simultaneously low NOx and PM emissions. In this paper a ...
متن کاملA Comparative Study on the use of Butyl Esters of Soyabean and Sunflower Oils as Biodiesel Fuel for Compression Ignition Engine
To study the feasibility of using two edible plant oils as diesel substitute a comparative study was made. Oils were exacted from the seeds of soyabean (Glycine Max, Family: Leguminoceae) and sunflower(Helianthus annuus, Family: Asteraceae/Compositeae). Oils were esterified (butyl esters) before blending with pure diesel in the ratio of 10:90, 15:85, 20:80, and 25:75 by volume. Pure diesel was ...
متن کاملNumerical study of the effect of fuel injection timing on the ignition delay, performance parameters and exhaust emission of gas/dual fuel diesel engine using Computational Fluid Dynamics
Today, due to the various usage of compression ignition engines in urban transportation, as well as the need to reduce exhaust emissions and control fuel consumption, the use of alternative fuels has become common in diesel engines. Gaseous fuel is one of the most common alternative fuels that can be used in diesel engines. The utilization of alternative fuels in compression ignition engines re...
متن کاملEffect of Hydrogen Addition to Natural Gas on Homogeneous Charge Compression Ignition Combustion Engines Performance and Emissions Using a Thermodynamic Simulation
The HCCI combustion process is initiated due to auto-ignition of fuel/air mixture which is dominated by chemical kinetics and therefore fuel composition has a significant effect on engine operation and a detailed reaction mechanism is essential to analysis HCCI combustion. A single zone-model permits to have a detailed chemical kinetics modeling for practical fuels. In this study a single-zone ...
متن کاملInvestigation of the effect of piston geometrical parameters on RCCI engine performance based on second law of thermodynamic
The reactivity controlled compression ignition engines have high thermal efficiency and low exhaust emission of nitrogen oxides and soot because of low temperature combustion. In this type of engines, low reactivity fuel is injected to air through intake port and high reactivity fuel is injected into the combustion chamber during compression stroke. The aim of current study is to investigate th...
متن کامل