Design for a 5-DOF Cable-Driven Anthropomorphic Arm
نویسندگان
چکیده
In this paper, a motion control approach for a 5-DOF cabledriven manipulator is designed, and the mechanical structure design of this anthropomorphic-arm is introduced. For the 5DOF manipulator, a hybrid algorithm is proposed to make the trajectory tracing of the manipulator in task space with high accuracy; the goals of the first phase of the robot arm have been meet. Although the method of motion control is limited in the current state, it serves as a strong foundation on which to test the performance and interface of the electronic components. The coupling cable lengths among the different joint modules are analyzed in detail.
منابع مشابه
Design and Analysis of 4-DOF Cable-Driven Parallel Mechanism
The design and analysis of a 4-DOF multi-link cable driven parallel mechanism is presented. In contrast to many existing cable driven parallel mechanism, the proposed manipulator’s rigid links are serially articulated. This design preserves the advantages associated with cabledriven parallel mechanisms, and introduces the advantages in having a serial kinematic structure. The kinematic and kine...
متن کاملSURGICAL ROBOTICS AND INSTRUMENTATION Remote active magnetic actuation for a single-access surgical robotic manipulator
Purpose Magnetic coupling is one of the few strategies to transmit motion through physical obstacles. This approach can be applied to remotely control and manipulate medical devices/robots inside the human body preventing the need for dedicated incisions [1, 2]. The most straightforward approach to take advantage of magnetic coupling to control a medical device inside the human body consists in...
متن کاملA Low-cost, 20-DOF Anthropomorphic Robotic Hand: Design, Actuation and Modeling
In order to effectively develop the control methods of an anthropomorphic robotic hand, it is important for researchers to have fast and easy access to modify any design parameters. To this end, we detail the process of designing a 20 degrees of freedom, cable-driven, anthropomorphic robotic hand. The prototyping process makes the most of 3D printing technology, and takes important factors such...
متن کاملDesign and Development of Cable Driven Upper Limb Exoskeleton for Arm Rehabilitation
this paper describes the design and kinematic analysis of a 5 DOF upper limb powered robotic exoskeleton for rehabilitation of the patients who survived stroke and the elderly who do not have enough strength to move their limbs freely. It was observed that the existing upper extremity exoskeletons were bulky and heavy which made them limited to applications and the complexity of the system incr...
متن کاملAn Experimental Characterization of a 1-DOF Anthropomorphic Arm for Humanoid Robots
In this paper, we have reported results of the experimental tests for validating and characterizing a new design and its operation for a humanoid robot arm with one actuator only. The core of the arm system consists of clutches that are activated or deactivated according to a programmed manipulation path-planning. Experimental tests are discussed with measured results to characterize the functi...
متن کامل