The Comparison of Vacuum Performance in the Undulator Chambers Installed at the Taiwan Light Source

نویسندگان

  • S. H. Chang
  • J. R. Chen
  • K. M. Hsiao
  • G. Y. Hsiung
  • S. N. Hsu
  • Y. J. Hsu
  • T. F. Lin
  • T. S. Ueng
  • W. H. Wei
چکیده

Several insertion devices (ID) have been built in the straight sections at Taiwan Light Source (TLS) to obtain coherent and high brightness photons. A W20 wiggler and a U5 undulator were installed in February of 1995 and March of 1997, respectively [1]. A U9 and an EPU5.6 undulator are to be installed in the April of 1999. Prior to the installation of insertion devices, U9 and EPU5.6, the ID chambers for these undulators have been installed during several previous shutdown periods. The comparison of vacuum performance in these undulator chambers, the effective pumping speed and the impact to the beam lifetime, etc., are described in this article.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Extruded Aluminum Vacuum Chambers for Insertion Devices

Extruded aluminum vacuum chambers are commonly used in the storage rings of synchrotron facilities. For 18 years the APS has designed and fabricated vacuum chambers made from extruded aluminum for use with insertion devices at the APS and for use at other facilities including BESSY II, the Swiss Light Source (SLS), the Canadian Light Source (CLS), the TESLA Test Facility (TTF), and the European...

متن کامل

Design and fabrication of a prototype planar undulator

The main goal of this work is to get the fabrication technology of the insertion devices. A prototype undulator with the period of 48mm and the peak magnetic field of 0.75 T has been fabricated using NdFeB-SH35 magnets based on the cooperation between ILSF and NSTRI. The total magnet length is 483 mm and the number of periods is 8. The magnetic parameters of the undulator are determined in orde...

متن کامل

Quantitative Comparison of Analytical solution and Finite Element Method for investigation of Near-Infrared Light Propagation in Brain Tissue Model

Introduction: Functional Near-Infrared Spectroscopy (fNIRS) is an imaging method in which light source and detector are installed on the head; consequently, re-emission of light from human skin contains information about cerebral hemodynamic alteration. The spatial probability distribution profile of photons penetrating tissue at a source spot, scattering into the tissue, and being released at ...

متن کامل

Mechanical Design of the Visa Undulator

As part of the research and development effort for a 4th generation light source, we have designed a 4-meter long Free-Electron Laser (FEL) undulator. The undulator will be installed at the Accelerator Test Facility (ATF) at Brookhaven National Laboratory to conduct a SelfAmplified Spontaneous Emission (SASE) demonstration. The demonstration is called VISA, which stands for “Visible to Infrared...

متن کامل

Planar Electromagnetic Multipole Correctors for a Circularly Polarized Undulator

Abstract Planar electromagnetic correction lenses were designed, constructed, and installed in order to compensate skew multipole components generated by an electromagnetic circularly polarizing undulator (CPU) for the Advanced Photon Source (APS). The reason for selection of the planar configuration is that the corrector lenses should fit around a flat undulator vacuum chamber. Comparison was ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1999