Interaction of hydrogen chloride with ice surfaces: the effects of grain size, surface roughness, and surface disorder.

نویسندگان

  • V Faye McNeill
  • Franz M Geiger
  • Thomas Loerting
  • Bernhardt L Trout
  • Luisa T Molina
  • Mario J Molina
چکیده

Characterization of the interaction of hydrogen chloride (HCl) with polar stratospheric cloud (PSC) ice particles is essential to understanding the processes responsible for ozone depletion. The interaction of HCl with ice was studied using a coated-wall flow tube with chemical ionization mass spectrometry (CIMS) between 5x10(-8) and 10(-4) Torr HCl and between 186 and 223 K, including conditions recently shown to induce quasi-liquid layer (QLL) formation on single crystalline ice samples. Measurements were performed on smooth and rough (vapor-deposited) polycrystalline ice films. A numerical model of the coated-wall flow reactor was used to interpret these results and results of studies on zone-refined ice cylinders with grain sizes on the order of several millimeters (reported elsewhere). We found that HCl adsorption on polycrystalline ice films typically used in laboratory studies under conditions not known to induce surface disordering consists of two modes: one relatively strong mode leading to irreversible adsorption, and one relatively weak binding mode leading to reversible adsorption. We have indirect experimental evidence that these two modes of adsorption correspond to adsorption to sites at crystal faces and those at grain boundaries, but there is not enough information to enable us to conclusively assign each adsorption mode to a type of site. Unlike what was observed in the zone-refined ice study, there was no strong qualitative contrast found between the HCl uptake curves under QLL versus non-QLL conditions for adsorption on smooth and vapor-deposited ices. We also found indirect evidence that HCl hexahydrate formation on ice between 3x10(-7) and 2x10(-6) Torr HCl and between 186 and 190 K is a process involving hydrate nucleation and propagation on the crystal surface, rather than one originating in grain boundaries, as has been suggested for ice formed at lower temperatures. These results underscore the dependence of the HCl-ice interaction on the characteristics of the ice substrate.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Studying the effect of roughness on soil-geotextile interaction in direct shear test

Abstract One of the methods of increasing soil resistance against failure is soil reinforcement using geosynthetics. Soil-geosynthetic interactions are of great importance and are affected by friction and adhesion at their interface. Soil gradation, contact surface roughness and geotextile density are among the factors affecting soil-geotextiles interaction this study, to investigate the eff...

متن کامل

A comparetive study of the effects of home and office bleaching on enamel surface roughness

Introduction: Increase in enamel surface roughness after bleaching is one of its major side effects. The purpose of this study is to compare changes in enamel surface roughness following bleaching with home versus office bleaching agents. Materials and Methods: In this experimental study, forty human sound premolar teeth were divided into 4 groups, randomly. Ten teeth were bleached using hydrog...

متن کامل

Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism

The spin-polarized calculations in generalized gradient approximation density–functional theory (GGA–DFT) have been used to show how the existence of second metals can modify the atomic hydrogen adsorption on Au (100), Cu (100), and Pt (100) surfaces. The computed adsorption energies for the atomic hydrogen adsorbed at the surface coverage of 0.125 ML (monolayer) for the monometallic Au (100), ...

متن کامل

Corrosion Inhibition of Sodium Phosphate for Coarse and Near Ultrafined-Grain Mild steel surface

An ultrafine grain surface layer with average crystallite size of 28 nm was produced on annealed mild steel through a wire brushing process. The effects of grain size reduction on the inhibition performance of sodium phosphate were investigated using polarization and electrochemical impedance spectroscopy (EIS) measurements. The crystal grain size of wire brushed surface was analyzed by X-ray d...

متن کامل

Experimental Investigation of Surface Roughness Effect on Flow Boiling in Internal Combustion Engine Water Jacket

The subjects of heat transfer and cooling system are very important topics in the Internal Combustion Engines (ICE). In modern cooling systems, low weight, small size and high compactness are the critical designing criteria that requires heat transfer enhancement. Boiling phenomenon which is occurred in the water jacket of the ICE is one of the methods to increase heat transfer in the coolant s...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • The journal of physical chemistry. A

دوره 111 28  شماره 

صفحات  -

تاریخ انتشار 2007