Viscometric and Rheological Behaviour of Chitosan-Hydrophilic Polymer Blends
نویسندگان
چکیده
Blends of chitosan with hydrophilic polymers were investigated for miscibility. Chitosan/poly (vinyl alcohol) (CS/PVA), chitosan/poly vinylpyrollidone (CS/PVP) and chitosan/poly (ethylene oxide) (CS/PEO) blends were prepared in dilute aqueous acetic acid ( = 1 %) and found to be miscible over the entire composition range by dilute solution viscosity and rheological measurements. The miscibility of blends by viscosity measurements at 25 0.1 °C was estimated on the basis of experimental and ideal values of miscibility parameters bm, [ ]m and . The rheological studies were performed on blends of mass fraction w = 2 % in dilute aqueous acetic acid ( = 1 %) at 25 0.1 °C in controlled rate mode. The flow curves of blends and viscosities were found to lie between those of principal components of the blend over the entire compositional range. The flow behaviour index of blends was determined by the Power law model, indicating pseudoplastic behaviour with pseudoplasticity increasing with CS mass concentration. The rheological data of blends was best described by the Cross model. Results from Fourier transform infrared spectroscopy also indicate the blends to be miscible.
منابع مشابه
Viscometric Studies in Dilute Solution Mixtures of Chitosan and Microcrystalline Chitosan with Poly(vinyl alcohol)
The viscosity behavior of aqueous mixtures formed by a polyelectrolyte (A) and a neutral polymer (B), such as chitosan/poly(vinyl alcohol) (Ch/PVA) and microcrystalline chitosan/poly(vinyl alcohol) (MCCh/PVA), have been investigated at 25 °C. The intrinsic viscosity and the viscosity interaction parameter of each polymer in 0.1 mol·dm-3 CH3COOH/0.2 mol·dm-3 NaCl solution as well as the ternary ...
متن کاملLDPE and poly(1-butene) blends: Morphology, crystallinity and rheological properties
In this work, the compatibility and crystallinity of low density polyethylene (LDPE) and polybutene-1 (PB-1) blends were studied. Various blends of LDPE/PB-1 containing 5, 10 and 20 wt.% PB-1 were prepared in a corotating twin-screw extruder and characterized by scanning electron microscopy (SEM), shear oscillation rheology and wide-angle X-ray diffractometry (WAXD). A matrix-droplet morphology...
متن کاملEffect of Micro Glass Flake on Morphological and Rheological Behaviour of Epoxy Vinyl Ester Composite Coatings
In the present work, attempts were made to investigate the reinforcement and treatment effect of GF on morphological and rheological behaviour of GF/epoxy vinyl ester composites. GF was incorporated into epoxy vinyl ester resin by sonication, and mechanical agitation. Rheological and morphological properties were studied as a function of particle treatment and size distributions. The dispersion...
متن کاملNon-woven Nanofiber Chitosan/peo Membranes Obtained by Electrospinning
The present work focused on the preparation and morphological characterization of chitosan-based nanofiber membranes, aiming at applications in medical and pharmacological areas. Membranes with nanofiber diameters ranging from 50 – 300 nm were prepared from polymer solutions through the electrospinning process. To stabilize the process, it was necessary to use poly(ethylene oxide) (PEO), which ...
متن کاملThe influence of branching efficiency on the rheology and morphology of melt state long chain branched polypropylene/polybutene-1 blends
In this study, the compatibility of the blends of polypropylene (PP) and polybutene-1(PB-1) homopolymer before and after long chain branching process were studied. The blends were prepared and long-chain branched directly via reactive extrusion process in presence of free radical initiator and trimethylolpropane tri methacrylate (TMPTMA) poly functional monomer. The optimum percentage of TMPTMA...
متن کامل