Feasibility of Ultra Low Energy Devices and Applications
نویسنده
چکیده
In this paper the results of an extensive literature study on Ultra-Low-Power (ULP) electronics is presented. It discusses an emerging application area, which is characterised by very strong power requirements, called ULP electronics. It aims to evaluate possible applications to derive the requirements that emerging trend in circuits must meet and to recognise as far as possible the challenges, which have to be faced. At first few selected applications which would at most benefit from an ULP design approach, are presented as example. Finally few examples of realized circuits in the market as well as in the literature are given.
منابع مشابه
Ultra-Low-Energy DSP Processor Design for Many-Core Parallel Applications
Background and Objectives: Digital signal processors are widely used in energy constrained applications in which battery lifetime is a critical concern. Accordingly, designing ultra-low-energy processors is a major concern. In this work and in the first step, we propose a sub-threshold DSP processor. Methods: As our baseline architecture, we use a modified version of an existing ultra-low-power...
متن کاملUltra Low Power Symmetric Pass Gate Adiabatic Logic with CNTFET for Secure IoT Applications
With the advent and development of the Internet of Things, new needs arose and more attention was paid to these needs. These needs include: low power consumption, low area consumption, low supply voltage, higher security and so on. Many solutions have been proposed to improve each one of these needs. In this paper, we try to reduce the power consumption and enhance the security by using SPGAL, ...
متن کاملبهبود بازده انرژی و ارزیابی اقتصادی موتورسیکلت الکتریکی با حضور موتور چهار فاز AFPM و ترکیب ابرخازن و باتری
Increasing the demand for electric vehicles, makes the manufactures to concentrate on the research of new energy storage devices, electro motors, and power electronic devices. The main subject in designing an electric motorcycle with four-phase AFPM and its full wave converter is to select suitable energy storage system and add on turbo-acceleration mechanism. Choosing the suitable energy stora...
متن کاملFeasibility of Successive Approximation Register ADC in Ultra Low Power Biomedical Applications
Analog-to-Digital Converter (ADC) is a critical block of the sensing unit of an implant and for measurements of various biophysiological signals, such as Electrocardiogram (ECG), Electroencephalogram (EEG) and Electromyogram (EMG) that covers the distinct portions of the frequency spectrum and signal bandwidths. ADC consumes about 30~35% of the total power of the device which is very high. Henc...
متن کاملInfluence of Thickness and Number of Silver Layers in the Electrical and Optical Properties of ZnO/Ag/ZnO/Ag/ZnO ultra-Thin Films Deposited on the Glass for Low-Emissivity Applications
We report on transparent ZnO/Ag/ZnO and ZnO/Ag/ZnO/Ag/ZnO thin-films were deposited on the glass substrate by RF and DC sputtering for ZnO and Ag targets, respectively. The electrical and optical properties of the single and double Low Emissivity coatings were investigated with respect to the deposition time of Ag mid layer. The visible transmittance remains about 65% for single and 45% for...
متن کامل