Application of Boiling Heat Transfer to High-Heat-Flux Cooling Technology in Power Electronics
نویسندگان
چکیده
Boiling heat transfer is a superior heat transfer technology using the latent heat transport with phase-change. However, it has been difficult to employ as a cooling technology for electronics because the unstable transition boiling and film boiling with excessive high temperature are impossible to control. In highly subcooled boiling, the coalescing bubbles formed on the heating surface collapse to many fine bubbles at the beginning of transition boiling and the heat flux exceeds the critical heat flux. This boiling regime has been called Microbubble Emission Boiling (MEB). Two models of cooling device are introduced using subcooled flow boiling with MEB for power electronics, where the maximum heat flux is 500 W/cm (5 MW/m).
منابع مشابه
Two Phase Flow Simulation for Subcooled Nucleat Boiling Heat Transfer Calculation in Water Jacket of Diesel Engine
Basic understanding of the process of coolant heat transfer inside an engine is an indispensable prerequisite to devise an infallible cooling strategy. Coolant flow and its heat transfer affect the cooling efficiency, thermal load of heated components, and thermal efficiency of a diesel engine. An efficient approach to studying cooling system for diesel engine is a 3D computational fluid dynami...
متن کاملExperimental Study for Investigating the Mechanism of Heat Transfer near the Critical Heat Flux in Nucleate Pool Boiling
Heat transfer coefficient in nucleate pool boiling near critical heat flux at least one orderhigher than the convectional heat transfer modes. In this paper, an experimental setup isdesigned and fabricated to investigate the mechanism of heat transfer from boiling surface tobulk liquid near critical heat flux. The images of pool boiling near the high heat flux regionreveals that the individual ...
متن کاملKeynote Paper High Flux Heat Removal with Microchannels – a Roadmap of Challenges and Opportunities
Heat fluxes in IC chips and other electronics equipment have reached the current limits of air cooling technology. Some of the applications require heat fluxes well beyond the limit of 100 W/cm, requiring advanced cooling solutions. Liquid cooling technology has been receiving attention as the advances in single-phase liquid cooling in microchannels have shown considerable promise. The extensio...
متن کاملExperimental Investigation of Surface Roughness Effect on Flow Boiling in Internal Combustion Engine Water Jacket
The subjects of heat transfer and cooling system are very important topics in the Internal Combustion Engines (ICE). In modern cooling systems, low weight, small size and high compactness are the critical designing criteria that requires heat transfer enhancement. Boiling phenomenon which is occurred in the water jacket of the ICE is one of the methods to increase heat transfer in the coolant s...
متن کاملHigh Flux Heat Removal with Microchannels—A Roadmap of Challenges and Opportunities
Heat fluxes in IC chips and other electronics equipment have reached the current limits of air-cooling technology. Some of the applications require heat fluxes well beyond the limit of 100 W/cm2, thus demanding advanced cooling solutions. Liquid cooling technology has also received attention as the advances in single-phase liquid cooling in microchannels have shown considerable promise. The ext...
متن کامل