Crack initiation in elastic bodies

نویسندگان

  • A. Chambolle
  • A. Giacomini
  • M. Ponsiglione
  • ANTONIN CHAMBOLLE
  • ALESSANDRO GIACOMINI
چکیده

In this paper we study the crack initiation in a hyper-elastic body governed by a Gri th's type energy. We prove that, during a load process through a time dependent boundary datum of the type t→ tg(x) and in absence of strong singularities (this is the case of homogeneous isotropic materials) the crack initiation is brutal, i.e., a big crack appears after a positive time ti > 0. On the contrary, in presence of a point x of strong singularity, a crack will depart from x at the initial time of loading and with zero velocity. We prove these facts (largely expected by the experts of material science) for admissible cracks belonging to the large class of closed one dimensional sets with a nite number of connected components. The main tool we employ to address the problem is a local minimality result for the functional E(u,Γ) := Z Ω f(x,∇v) dx+ kH(Γ), where Ω ⊆ R, k > 0 and f is a suitable Carathéodory function. We prove that if the uncracked con guration u of Ω relative to a boundary displacement ψ has uniformly weak singularities, then con gurations (uΓ,Γ) with H(Γ) small enough are such that E(u, ∅) < E(uΓ,Γ).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Side Effects of Shot Peening on Fatigue Crack Initiation Life

Shot peening beneficial effects on fatigue life of mechanical components are well known. However, there are some reports in the literature that indicate inappropriate shot peening parameters tend to reduce the fatigue life. It is therefore, the purpose of this study to find a logical quantitative justification for these observations. Using finite element method, a dynamic elastic-plastic simula...

متن کامل

A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension

In this work, the mechanism for fracture of brittle substances such as rocks under a uniform normal tension is considered. The oriented straight micro-cracks are mostly created in all the polycrystalline materials resulting from the stress concentrations. The present work focuses on the interactions of the pre-existing micro-cracks, which can grow and propagate within a rock-like specimen. The ...

متن کامل

Predicting Depth and Path of Subsurface Crack Propagation at Gear Tooth Flank under Cyclic Contact Loading

In this paper, a two-dimensional computational model is proposed for predicting the initiation position and propagation path of subsurface crack of spur gear tooth flank. In order to simulate the contact of teeth, an equivalent model of two contacting cylinders is used. The problem is assumed to be under linear elastic fracture mechanic conditions and finite element method is used for numerical...

متن کامل

Cement-Implant Interface Fracture Failure by Crack Initiation Due to Interface Cavity Stress Concentration

Nowadays total joint replacements are widely used in the world, so in average 800,000 joint surgeries are done yearly only in Europe and North America. However implant loosening is and remains as the major issue of all implant failures and therefore causes revision surgery procedures. Studies and experiments have identified poor fixation of implants most likely is the main cause of long term im...

متن کامل

Influence of elastic variations on crack initiation in functionally graded glass-filled epoxy

Crack tip deformations and fracture parameters in functionally graded glass-filled epoxy beams are experimentally evaluated under static and dynamic loading conditions. Beams with unidirectional, monotonic elastic gradients and cracks along the gradient are examined. SEN samples with increasing or decreasing Young’s modulus ahead of the crack tip are studied in symmetric four-point bending and ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005