Non-convex Optimization in Internet Routing: Protocol, Formulation, and Computation

نویسندگان

  • Dahai Xu
  • Mung Chiang
  • Jennifer Rexford
چکیده

Network operators control the flow of traffic through their networks by adapting the configuration of the underlying routing protocols. For example, they tune the integer link weights that routing protocols like OSPF use to do distributed forwarding of packets. The resulting optimization problem by the operator—to find the best link weights for a given topology and traffic matrix—is well-known to be computationally intractable even for the simplest objective functions, forcing the use of local-search techniques. This is a difficult optimization in part because these protocols split traffic evenly along shortest paths and in part because of the specific representation of the optimization problem. In this paper, we propose a readily implementable routing protocol called Distributed Exponentially-weighted Flow SpliTting (DEFT), where the routers can direct traffic on non-shortest paths, with an exponential penalty on longer paths. It leads to a cost function for the operator that is provably not worse than OSPF, and verified to be almost optimal in experiments based on various network topologies. One of the innovations in solving link weight optimization for DEFT is on problem representation: both link weights and traffic flows are integrated as optimization variables, and another is the computational method of two-stage iterative relaxation, which is much more efficient than state-of-the-art local search heuristics. DEFT retains the simplicity of having routers compute paths based on configurable link weights, while approaching the performance of more complex routing protocols that can split traffic arbitrarily over any paths.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Improving the Performance of RPL Routing Protocol for Internet of Things

The emerging Internet of Things (IoT) connects the physical world to the digital one and composes large networks of smart devices to support various applications. In order to provide a suitable communication in such networks, a reliable routing protocol is needed. In this paper, a modified version of an IPv6 Routing Protocol for Low-Power and Lossy networks (RPL), which has been standardized by...

متن کامل

Nonconvex Optimization for Communication Networks

Nonlinear convex optimization has provided both an insightful modeling language and a powerful solution tool to the analysis and design of communication systems over the last decade. A main challenge today is on nonconvex problems in these applications. This chapter presents an overview on some of the important nonconvex optimization problems in communication networks. Four typical applications...

متن کامل

Solving a non-convex non-linear optimization problem constrained by fuzzy relational equations and Sugeno-Weber family of t-norms

Sugeno-Weber family of t-norms and t-conorms is one of the most applied one in various fuzzy modelling problems. This family of t-norms and t-conorms was suggested by Weber for modeling intersection and union of fuzzy sets. Also, the t-conorms were suggested as addition rules by Sugeno for so-called  $lambda$–fuzzy measures. In this paper, we study a nonlinear optimization problem where the fea...

متن کامل

Energy Efficient Multi Path Routing Protocol in Internet of Things

Internet of things (IoT) is a network with a wide range of smart and physical objects and gadgets that can exchange information with each other. IOT introduces a variety of services that human life is dependent on its secure and accessible activities. These networks face numerous problems in terms of energy consumption and reliable communication to send the correct data. Moreover, the character...

متن کامل

An Intelligent Approach Based on Meta-Heuristic Algorithm for Non-Convex Economic Dispatch

One of the significant strategies of the power systems is Economic Dispatch (ED) problem, which is defined as the optimal generation of power units to produce energy at the lowest cost by fulfilling the demand within several limits. The undeniable impacts of ramp rate limits, valve loading, prohibited operating zone, spinning reserve and multi-fuel option on the economic dispatch of practical p...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007