Mechanical Properties of Bulk Metallic Glasses and composites
نویسندگان
چکیده
We have studied the mechanical properties of monolithic bulk metallic glasses and composite in the La based alloys. La86-yAl14(Cu, Ni)y (y=24 to 32) alloy systems was used to cast the in-situ structure and subsequently tested under compression. We found that the ductility of the monolithic is actually poorer than that of the fully crystalline composite.
منابع مشابه
Bulk metallic glass composite with good tensile ductility, high strength and large elastic strain limit
Bulk metallic glasses exhibit high strength and large elastic strain limit but have no tensile ductility. However, bulk metallic glass composites reinforced by in-situ dendrites possess significantly improved toughness but at the expense of high strength and large elastic strain limit. Here, we report a bulk metallic glass composite with strong strain-hardening capability and large elastic stra...
متن کاملSpark Plasma Sintering: A Useful Technique to Develop Large-Sized Bulk Metallic Glasses
Metallic glasses exhibit unique combination of physical, chemical and mechanical properties due to their amorphous nature which lacks long range order and defects such as grain boundaries and dislocations [1,2]. In the past two decades, they have been rapidly developed for application in many fields. However, the disadvantages such as poor plasticity and limited dimensions hamper their large-sc...
متن کاملRecent Progress in Ti-Based Metallic Glasses for Application as Biomaterials
Ti-based bulk metallic glasses are of great interest in biomedical applications due to their high corrosion resistance, excellent mechanical properties and good biocompatibility. This article reviews recent progress in the development of Ti-based metallic glasses for the application as biomaterials. Ti-based (TiZrCuPd, TiZrCuPdSn, and TiZrCuPdNb) bulk metallic glasses without toxic a...
متن کاملNMR signature of evolution of ductile-to-brittle transition in bulk metallic glasses.
The mechanical properties of monolithic metallic glasses depend on the structures at atomic or subnanometer scales, while a clear correlation between mechanical behavior and structures has not been well established in such amorphous materials. In this work, we find a clear correlation of (27)Al NMR isotropic shifts with a microalloying induced ductile-to-brittle transition at ambient temperatur...
متن کاملDevelopment of tough, low-density titanium-based bulk metallic glass matrix composites with tensile ductility.
The mechanical properties of bulk metallic glasses (BMGs) and their composites have been under intense investigation for many years, owing to their unique combination of high strength and elastic limit. However, because of their highly localized deformation mechanism, BMGs are typically considered to be brittle materials and are not suitable for structural applications. Recently, highly-toughen...
متن کامل