Cooling augmentation using microchannels with rotatable separating plates
نویسندگان
چکیده
Article history: Received 9 January 2011 Received in revised form 9 February 2011 Accepted 9 February 2011 Available online 21 April 2011
منابع مشابه
Cooling Behavior in a Novel Heat Sink Based on Multilayer Staggered Honeycomb Structure
A novel heatsink based on a multilayer stack of thin metal plates with staggered honeycomb cell microchannels was investigated in this paper. A series of working-parametric tests such as different heat sink pipe diameter and pumping power were conducted for the microchannel cooling system to determine the heat transfer performance under small flow rate conditions. For the double fluid flow inle...
متن کاملThe numerical study of heat transfer of water-TiO2 nanofluid in the triangular microchannels with semiattached and offset mid-truncated rib,s
In this numerical study the the heat transfer and laminar nanofluid flow in the three-dimensional microchannels with triangular cross-section is simulated. For increase the heat transfer from the walls of the channel, semiattached & offset mid- truncated rib,s Placed in the canal, and the tooth geometry and the impact is studied. In this study, the water is base fluid, and the influence of th...
متن کاملEntropy Generation In an Unsteady MHD Channel Flow With Navier Slip and Asymmetric Convective Cooling
The combined effects of magnetic field, Navier slip and convective heating on the entropy generation in a flow of a viscous incompressible electrically conducting fluid between two infinite horizontal parallel plates under a constant pressure gradient have been examined. Both the lower and upper plates of the channel are subjected to asymmetric convective heat exchange with the ambient fluid. T...
متن کاملMicrochannels and Minchannels – History , Terminology , Classification and Current Research Needs
Microchannels and Minichannels are found in many biological systems providing very high heat and mass transfer rates in organs such as the brain, lung, liver and kidney. Many high flux cooling applications are effectively utilizing their high heat transfer capabilities of these channels. A brief overview of the historical perspective and some of the issues that need to be addressed with microch...
متن کاملAir cooling of a microelectronic chip
A single-mask process is used to fabricate metal microchannels of 5–10 μm in width, 10–40 μm in height and millimeters in length, monolithically (i.e., no bonding) on the chip front side. Taking advantage of the small size and the diverging cross-section allowed for these microchannels, we explore the air cooling of a microelectronic chip, addressing the limitations of the liquid cooling with t...
متن کامل