Interactions between calcium, phosphate, and albumin on the surface of titanium.
نویسندگان
چکیده
The deposition of calcium phosphate on chemically polished commercially pure titanium immersed in Hank's balanced salt solution (HBSS) with bovine serum albumin (BSA) (concentrations 0 and 4 mg/mL) has been investigated. Electrochemical techniques, 125I labeling of albumin, scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were used. A tricalcium phosphate layer with a thickness of ca. 1 microm was formed for periods of immersion in HBSS ranging between 1 and 2 weeks. A concentration of 4 mg/mL of BSA prevented its formation, even for periods as long as 1 month. In the absence of BSA, the electrochemical behavior of titanium specimens was significantly affected by the length of immersion time, reflecting the changes that slowly occur on their surface. In the presence of BSA, the surfaces maintained most of their original electrochemical activity. Surface studies have shown that calcium and phosphate become incorporated in the surface at very early stages of immersion. Albumin, which was rapidly adsorbed on titanium, was slowly desorbed when titanium was placed in HBSS. Protein and phosphate may coexist on the same surface, but initially adsorbed albumin molecules prevent the precipitation of a thick layer of tricalcium phosphate.
منابع مشابه
Induction of calcium phosphate precipitation by titanium dioxide.
Titanium powder and various titanium dioxides were tested for their capacity to reduce the induction time for calcium phosphate precipitation from supersaturated solutions. Only after a pretreatment aimed at increasing its oxide surface layer was titanium powder found to accelerate the precipitation from solutions containing 2 mmol/L CaCl2, 2 mmol/L KH2PO4, 50 mmol/L Hepes, pH 7.2, and to induc...
متن کاملEnhancing Protein Incorporation in Calcium Phosphate Coating on Titanium by Rapid Biomimetic Co-Precipitation Technique
Calcium phosphate coating (CaP) has been employed for protein delivery, but the typical direct protein adsorption on the coating led to low incorporation content and fast release of the protein from the coating. By using bovine serum albumin (BSA) as a model protein, rapid biomimetic co-precipitation between calcium phosphate and BSA was employed to control the distribution of BSA within calciu...
متن کاملEffect of Alkaline-Acid Treatment on the Biomimetic Formation of Calcium Phosphate Layers on Titanium Substrates:An In Vitro Study
متن کامل
Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior
Microporous Calcium Titanium Phosphate glass-ceramics have many uses in high-tech industries. For example, they have applications in catalysts industry. In this study, different molar percentages of alumina were added to a glass with P2O5 30, CaO 45, TiO2 25 (mol%) composition. The samples were melted at 1350°C and crystallization heat treatment was performed on...
متن کاملAdsorption of Bovine Serum Albumin onto Hydroxylapatite: Theoretical Modeling and Measurements
Adsorption of Bovine Serum Albumin (BSA) onto calcium Hydroxyl Apatite (HA), Ca10PO4(OH)2, has been studied by Ultra Violet (UV) spectroscopy. The adsorption isotherms of BSA onto the HA surface at 291.7 K and 303.2 K were satisfactorily presented by Langmuir equation and the evaluated parameters are reported. The specific surface area of H...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of biomedical materials research
دوره 55 1 شماره
صفحات -
تاریخ انتشار 2001