Anode region design and focusing properties of STARSilicon Drift
نویسندگان
چکیده
Electron collection at the anodes of large{area silicon drift detectors was studied with STAR2 prototypes. Results of measurements of anode leakage currents, signal dependence on focusing voltages, anode uniformity, and model simulations are reported. A design of the anode region is presented. The design optimization is discussed.
منابع مشابه
Structure Formation in Anode and Its Effect on the Performance of Micro-Tubular SOFC: A Brief Review
Anode-supported micro-tubular solid oxide fuel cell (SOFC) offers many advantages over the electrolyte and cathode-supported confgurations in terms of simplicity, reliability, and efciency. In such design, the anode substrates should possess a highly porous structure, provide active sites reaction as well as serving good mechanical strength. This structure is desired to ...
متن کاملNew SOI lateral power devices with trench oxide
We describe new SOI lateral power devices which have a trench oxide to improve the device performance. Highvoltage super-junction (SJ) SOI-LDMOSFETs have a trench oxide in the drift region. It allows to reduce the drift length without degrading the breakdown voltage. With the proposed device structure a reduction of the on-resistance of the n-drift layer can be achieved. The breakdown voltage a...
متن کاملMeasurement of Carbon Disulfide Anion Diffusion in a TPC
The Directional Recoil Identification From Tracks (DRIFT) detector has recently been proposed [?] to search for dark matter. This detector is unique in that it drifts negative ions, instead of electrons, in a time projection chamber (TPC). A detailed description of the operation, motivation, and other uses of a negative ion TPC (NITPC) can be found in [?]. Briefly, an electronegative component ...
متن کاملField Dependent Charge Carrier Transport for Organic Semiconductors at the Time of Flight Configuration
In this paper, we used the time-of-flight (TOF) of a charge packet, that injected by a voltage pulse to calculate the drift velocity and mobility of holes in organic semiconducting polymers. The technique consists in applying a voltage to the anode and calculating the time delay in the appearance of the injected carriers at the other contact. The method is a simple way to determine the charge t...
متن کاملImproved Mechanical and Electrochemical Properties of Artificial Graphite Anode Using Water-Based Binders in Lithium-Ion Batteries
In recent years, many studies have focused on the active materials of anodes to improve the performance of LIBs, while limited attention has been given to polymer binders, which act as inactive ingredients. However, polymer binders have amazing influence on the electrochemical performance of anodes. Herein, to investigate the binding performance between MCMB artificial graphite and the copper c...
متن کامل